Table of Contents
Advertisement
Operating Your Camera
• SHARPNESS : The outline of the video image becomes cleaner and more
distinctive as the level of SHARPNESS increases. If the level
goes up excessively, however, it may affect the video image and
generate noise.
RESET : Returns to the level which was set by the manufacturer for shipment.
RETURN : Returns to the SETUP menu.
EXIT
Saves all the setting menus and then exits.
38
COLOR IR CAMERA
User's Manual
Troubleshooting
If there are problems in operation, please refer to the items below. If the
problem persists, please contact the agent you purchased this product from.
Problem
Nothing appears on the screen.
• Please check the power connection.
• Please check the video signal line connection.
The video image is not clear.
• Please check if the lens is clean.
Please clean the lens with a clean cloth or brush.
• Please adjust the contrast feature of the monitor.
• Please make sure that the screen is not exposed directly to
a bright light. Please move the camera if necessary.
The screen is dark.
• Please adjust the contrast feature of the monitor.
• If you have an intermediate device, set the 75Ω/ Hi-z
properly, and check the terminals.
There is a problem with the
• Please check if an appropriate power source to the
camera operation. The camera
camera complies with the manufacturer's standard
surface is too hot and black
requirement, or if the voltage keeps changing.
stripes appear on the screen.
Color are not quite right
• Please check the 'WHITE BAL' setting.
DAY&NIGHT(AUTO, B/W)
• Please check if the AGC menu is set to the OFF position.
mode doesn't Operate.
SENS-UP function doesn't
• Please check if the AGC menu is set to the OFF position.
operate.
• Isn't DAYNIGHT function setting up the color mode?
IR-LED isn't lighted.
• Please change the AUTO or B/W mode.
• Please confirm whether communication setting method
OSD control doesn't operate.
and RS-485 control terminal connection fit.
COLOR IR CAMERA
Solution
39
User's Manual
Advertisement
Table of Contents
