Table of Contents
Advertisement
Quick Links
Version 1.1
www.samsungsecurity.com
Color Camera Module
SPECIFICATIONS
MODEL
SCC-ZM395
DATE
Nov. 01. 2009
CUSTOMER
SUPPLIER
CUSTOMER
APPROVED
SAMSUNG ELECTRONICS Co., Ltd.
VSS Business Team
416, Maetan-3dong, Yeongtong-gu , Suwon-City, Gyeonggi-do, 443-742, Korea
Tel : 031-277-3986, 3381, 3980, 3676
- 1 -
Advertisement
Table of Contents
Related Manuals for Samsung SCC-ZM395
Summary of Contents for Samsung SCC-ZM395
- Page 1 Version 1.1 www.samsungsecurity.com Color Camera Module SPECIFICATIONS MODEL SCC-ZM395 DATE Nov. 01. 2009 CUSTOMER SUPPLIER CUSTOMER APPROVED SAMSUNG ELECTRONICS Co., Ltd. VSS Business Team 416, Maetan-3dong, Yeongtong-gu , Suwon-City, Gyeonggi-do, 443-742, Korea Tel : 031-277-3986, 3381, 3980, 3676 - 1 -...
-
Page 2: Table Of Contents
Table of Contents - Revision History 1. Features --------------------------------------------- 4 2. Precautions ---------------------------------------- 5 3. Specifications Camera Module Spec. -------------------------------- 6 Spectral Response Spec. ----------------------------- 7 Hardware Spec. ------------------------------------------ 8 Interface Circuit ------------------------------------------ 9 Reliability Zoom Lens ---------------------------------- 10 Dimension -------------------------------------------------- 11 Packing Spec. -
Page 3: Revision History
- Revision History Date Version '09. 09. 13 '09. 10. 01 '09. 11. 01 Description Establishment (for R&D sample) Mass Production Protocol changed and fixed - 3 - Version 1.1... -
Page 4: Features
1. Features ■ 1/4" 410K/470K Sony Ex-View-HAD Double Scan CCD Power Zoom Optical 39x (3.4~132.6mm), Digital 12x(0.1step) Minimum illumination 1.2 Lux (F1.6/WIDE, 50 IRE, Color, Sens-Up Off) S/N Ratio 52 dB ■ High Resolution : more than 560(Color)/600(BW) TV Lines This camera has realized high resolution of 560(Color)/600(BW) TV lines using the top-notch full digital image processing, 12 Bit A/D serial signal processing and special algorithm technologies. -
Page 5: Precautions
2. Precautions ■ Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the CCD image sensor. ■ Do not use the camera in the extreme environments. - Extremely hot or cold place such as radiators, heat registers (Operating condition -10 ℃... -
Page 6: Specifications
3. Specifications 3-1. CAMERA Module Spec. Items Sub-items Device Total Effective Inter. H/V Sync. LL H/V Horizontal/Verical Resolution Minimum illumination Performance (F1.6/Wide) S/N Ratio focal length, F number Drive Type Lens M.O.D. View Angle Privacy Zone Day&Night Motion Detection D-Zoom High Speed Shutter Flickerless Sens Up (Low Shutter) -
Page 7: Spectral Response Spec
Version 1.1 3-2. Spectral Response Spec. CCD (ICX448AK/449AK) - 7 -... -
Page 8: Hardware Spec
3-3. Hardware Spec. 1 2 3 4 ③ Zoom Lens Tele/Wide Switch ① CN207 : I/O Connector-1 Pin NO Pin Name Read Data CMOS 5V (Low: Max 0.8V, high:min.3V) Send Data CMOS 3.3V (Low: Max 0.1V, high:min.2V) Ground (for TxD/RxD) DC IN Power input (DC +9V ~ +15V) Ground (for DC IN) -
Page 9: Interface Circuit
Version 1.1 3-4. Interface Circuit ① Video Amp Block ② Communication (TXD/RXD) Block : TTL Level ③ Power Input Block ④ Lpulse (External sync) Block ※ NTSC: 60Hz ± 0.3Hz PAL: 50Hz ± 0.3Hz 3.3 Vp-p EXT_SYN ※ Min. 1msec - 9 -... -
Page 10: Reliability Zoom Lens
3-5. Reliability Zoom Lens ① Zoom Operation : more than 500,000 times 960pps (1-2phase) Tele side Wide side 1sec 1 moving 5 moving Reset Position ② Focus Operation : more than 500,000 times Near side Reset Position ∞ side 960pps (1-2phase) ③... -
Page 11: Dimension
3-6. Dimension Front Right Side Top Side Left Side Rear Bottom Side - 11 - Version 1.1 Lens Effective Angle Diagonal H : 20.9 mm Horizontal H : 18.9576mm Vertical H : 18.4620mm... -
Page 12: Packing Spec
Version 1.1 3-7. Packing Specifications (1 Carton = 10 ea) Zoom Module Test BAG CAP Report CUSHION PANEL (2 x 5) LABEL CARTON BOX MODEL NAME - 12 -... -
Page 13: Function
4. Function 4-1. OSD MENU Structure MAIN MENU CAMERA SET Camera related functions and data. INTELLIGENCE Motion detection, and more. PRIVACY ZONE Privacy related settings PRESET SET Preset position and Preset ID OTHER SET Configure for Factory Defaults, and more. COMMUNICATION Communication set. -
Page 14: Function (Osd)
4-2. Function (OSD) □ USING ICONS IN THE MENU ◆ If these icons appear in the left and right corner of a menu item, you can use the joystick to move to the previous or next menu. ◆ (EXIT) Exit the menu setting. Before you exits the menu setting, select SAVE to save your settings, or select QUIT to cancel. -
Page 15: Camera Setup
4-2-1.CAMERA SETUP ● CAMERA ID ● IRIS The IRIS menu is used if you want to adjust the intensity of radiation incoming to the camera. ◇ ALC (Automatic Light Control) You can configure the general settings of the module. Select <MAIN MENU> → <CAMERA SET>. The Camera Setup menu appears. - Page 16 ◇ MANUAL ● AGC(Auto Gain Control) / MOTION You can specify a level of AGC for controlling the camera motion. This is available only of the SENSE UP menu is set to AUTO. Select F.FAST if you want to monitor a very fast moving object in a low contrast scene, and S.SLOW if monitoring a very slow moving, inanimate object in the same condition.
- Page 17 ● DNR (Digital Noise Reduction) Reduces the noise on the screen. This is especially useful for a severely distorted screen. You can set the level if you set DNR to USER. This module use the motion adaptive DNR algorithm. This is mixed 2D & 3D method data depends on motion.
- Page 18 ● WHITE BAL - BURST : If set to <OFF>, the burst signal will not be output in NIGHT mode. - DAY → NIGHT BRIGHTNESS : Specify the brightness level switching from COLOR to BW filter. Adjusting from HIGH to LOW will cause to switch the filter in a darker screen. - DAY →...
- Page 19 According to the specified recording mode, select a <WHITE BAL> mode with necessary options. - ATW1,2 : The camera can automatically adjust the color temperature in real time, according to the ambient conditions. (Color temperature range ATW1: 2500K ~ 9500K, ATW2 : 2000K ~ 10000K) - AWC : Pressing [ENTER] on a desired item will perform ATW once.
- Page 20 ● DETAIL Controls the horizontal or vertical distinction. ● V-SYNC Select the vertical sync mode for INT or LINE. If you select INT, the camera will use the internal synchronization. If selecting LINE, the camera will use the external power source frequency for the synchronization.
-
Page 21: Privacy Zone Setup
● MASK AREA ● DISPLAY : ON, OFF With the DISPLAY option set to ON, a motion function will be displayed on the screen, if detected. ● SENSITIVITY : 1~7 Set the sensitivity of the motion detection. ● RESOLUTION : 1~5 If setting it to high, the camera can detect even a trivial movement of the target. - Page 22 UART. Use the ▲▼◀▶ switch to specify the protocol and baud rate for communications. ● PROTOCOL SAMSUNG, PELCO-P/D, VICON, PANASONIC, PHILIPS, ERNA, DIAMOND, VCLTP, KALATEL ● BAUD RATE : 2400, 4800, 9600, 19200, 38400 ※ The baud rate differs, depending on the specified protocol.
- Page 23 4-2-7. SYSTEM INFORMATION 4-2-8. LANGUAGE SET UP You can view the system information including the protocol, address, baud rate, serial number, camera version, and EEPROM version. The camera supports 5 different languages. Select a preferred language. - 23 - Version 1.1...
-
Page 24: Communication
∴ Check Sum : DCH ◆ Ack. Format Samsung communication utilizes Ack. codes. When controller sends a command, the camera sends back an Ack. This is our basic procedure to make sure that the communication and the camera function are properly executed. - Page 25 Byte 1 Byte 2 Byte 3 Sender Target A0H(1) Address(1) Address(1) ACK is applicable only in case that Byte4 of the command is 03H. Byte5, Byte6 and Byte7 of the Ack. data means as follows. ① * Byte5 of the Ack. data indicates whether the camera received command successfully. 00H : OK 01H : Error (Request Re-transmission) ②...
- Page 26 BLC ON IRIS AREA DISPLAY ON BLC ON USER SIZE & LOCATION Byte4 Byte5 Byte6 Byte7 Byte8 *String Table - 26 - Items 00H: SAMSUNG 01H: VICON 02H: PANASONIC 03H: PHILIPS 04H: PELCO-P 05H: KALATEL 06H: ERNA 07H: DIAMOND 08H: VCLTP...
- Page 27 BLC ON USER AREA Horizontal Start Point BLC ON USER AREA Horizontal End Point BLC ON USER AREA Vertical Start Point BLC ON USER AREA Vertical End Point * The BLC USER area minimum length is 121 (0x79) ; minimum width is 94 (0x5D). If you set the area is smaller than the minimum area, it only can display the minimum area.
- Page 28 FLICKER- FLICKERLESS LESS *This function is disabled when SHUTTER is FIX or SENS-UP is FIX or AGC is FIX. *When zoom ratio is more than 45x including DZOOM, DIS function becomes automatically OFF. DISPLAY BURST DAY/NIGHT AUTO DAY → NIGHT BRIGHTNESS DAY/NIGHT AUTO DAY →...
- Page 29 * When BACKLIGHT is BLC, the MASK AREA is disable * The Mask area only can be used in AUTO mode * The area maximum length is 239 ( 0xEF) ; maximum width is 188 (0xBC) If you set the area is larger than the maximum area, it only can display the maximum area * The area minimum length is 120 (0x78) ;...
- Page 30 DETAIL DETAIL V-SYNC V-SYNC V-SYNC PHASE * When power is DC, LINE LOCK is disabled automatically. AGC COLOR AGC COLOR SUPPRESSION REVERSE REVERSE POSI/NEGA POSI/NEGA * This function is disabled when privacy zone is ON, and this PIP disappears when SENS-UP is operated. IMAGE STILL IMAGE STILL LENS INITIALIZATION...
- Page 31 PRIVACY MASK AREA SIZE PRIVACY MASK AREA LOCATION Horizonal Point 1 Horizonal Point 2 Vertical Point 1 Vertical Point 2 PRIVACY MASK AREA SAVED DATA DELETE * REVERSE OFF : the left bottom corner (0,0) : the left top corner (0,0) * Using the PRIVACY MASK AREA SAVED DATA DELETE command, the Privacy point will be direct deleted even though not used the save command.
- Page 32 PRESET ID MENU DISPLAY LANGUAGE LANGUAGE SELECT DEFECT COMPENSATION *String Table - 32 - Version 1.1 00H~FFH: PRESET No.0~255 *2H (PRESET ID Sequence) 01H~0CH: 0 ~ 12 *3H (String) space NTSC-1 MODEL 00H: English, 01H: French 02H: Spanish, 03H: Japanese 04H: Portuguese PAL-1 MODEL 00H: English,...
- Page 33 ◆ Camera Inquiry Command Command POSITION ZOOM MAGNIFICATION FOCUS POSITION RED,BLUE Gain value NIGHT RED,BLUE Gain value Horizontal & Vertical Value BLC USER AREA Horizontal Value Vertical Value Horizontal & Vertical Value FILTER_ AUTO MASK1_ AREA Horizontal Value Vertical Value Horizontal &...
- Page 34 ◆ Pan/Tilt angle decide the privacy area display ( NO Ack. Signal ) Command PAN/TILT ANGLE ※ When Pan/Tilt angle is changed, always send the Pan/Tilt angle to ZM395 set. Because the privacy zone need the current Pan/Tilt angle to display when you set the privacy zone. Use the protocol is like the above.