Table of Contents
Advertisement
Components of your camera
Your camera has the following components:
1
2
5 6
7 8
Video connector
!
Power connector
Cover dome: Covers the main body for protection.
1
Main body: Includes a lens, a switch board, a PCB
2
board, screws, and such.
Mount bracket: Used as a ceiling or wall fixture. It
3
is fixed using three long tab screws provided in the
package.
Cable Stopper: If drawing the cable from a hole in
4
3
the ceiling, remove this stopper and pass the cable
through the opening to connect.
Zoom lever: Using this lever, the lens zoom can be
5
adjusted and fixed.
Focus lever: The lens focus can be adjusted by
6
rotating it left or right. Rotate it clockwise for fixing.
4
Tilt fixing screw: Using this screw, the slope of the
7
Lens
lens can be adjusted and fixed.
Switch board: Includes two kinds of control switches
8
such as function switches and phase-control switches.
The board has eight function switches in the middle
and two phase-control buttons on each side of the
function switch area.
Installation Guide Mark: This mark must be aligned
9
with the marking on the bracket when attaching the
camera to the bracket.
Lock releaser: Push it outward and rotate the main
0
body in UNLOCK direction when you want to remove
9
the Mount bracket from the Main body or to remove
the installed camera from the Mount bracket.
0
Cable: Connect the Video connector to BNC cable
!
and Power connector to power adapter.
Advertisement
Table of Contents
