Vesa Mounts, General Description; Installing The Alignment Brackets - Planar VM55LX-U User Manual

4.

VESA Mounts, General Description

VESA mounts are used to secure the Planar VM Series display. The display can be installed
using a variety of VESA mounts available through Planar. If you do not have a VESA mount,
and would like to purchase one, contact Planar.
If you purchased a VESA mount, you should have a received a separate box with mounting
supplies and an installation manual. Follow these instructions carefully.
Keep in mind the following general installation guidelines:

Screw length is crucial and will vary depending on the type of mount you use. Total
screw length includes the penetration length, plus the length required, by the type of
VESA mount in use.
Caution: Shorter screws will result in insufficient mounting strength and longer screws could
puncture parts inside the display.

Prior to installation, make sure you know where all of the mounting points are located.

Follow all safety precautions outlined in the VESA Installation manual.

Verify the parts received with the list shown in the VESA Installation manual.
4.1

Installing the Alignment Brackets

1. Install the alignment bracket hardware on the panel as shown below, depending on the
panel position within the wall.
Planar VM Series User Manual
020-1357-00C
Introduction
Page | 10