Port Leds; L1 And L2 Port Leds; Supported Transceivers - Cisco UCS 6454 Installation Manual

Port LEDs

LED State
Solid red
Port LEDs
The port LED states are listed below.
LED State
Yellow
Green
Off
Blinking yellow

L1 and L2 Port LEDs

The L1 and L2 port LED states are listed below.
LED Position
Left
Left
Right
Right

Supported Transceivers

The Cisco UCS 6454 Fabric Interconnect support SFP28 Ethernet transceivers, SFP transceivers, SFP28
transceivers, SFP28 copper twinax cables with integrated transceivers, SFP Fibre Channel transceivers, QSFP
transceivers, QSFP28 transceivers, and QSFP cables. Except where noted, both the Cisco UCS 6454 Fabric
Interconnect support all the transceivers listed in this section. Ports 1–8 operate as unified ports that are capable
of 10/25-Gbps fixed Ethernet, 10/25-Gbps FCoE, or 8-, 16-, or 32 Gbps Fibre Channel ports.
Cisco UCS 6454 Fabric Interconnect Hardware Installation Guide
8
Description
Major fan alarm (two or more fans are missing or have failed, or there is a fan direction
mismatch
Description
Enabled, but SFP not inserted
Administrative down (software shutdown)
Enabled and link is up
Enabled, but link is not connected
Power On Self Test (POST) failed
Port beacon enabled
LED State Description
Off No link
Solid green Physical link
Off No activity
Blinking green Activity
Product Overview