Changing The Light Bulb(S) - Samsung SR-28NMA Instruction Manual

Changing the Light Bulb(s)

When you open the refrigerator door, a light comes on to help you
find what you are looking for more easily. If you need to replace
the bulb(s), proceed as follows.
Type A or F
1
Remove the chiller compartment by:
Pulling it towards you until it meets the stop
Tilting the front up slightly and continuing to pull the
compartment towards you
2
With a flat-bladed screwdriver, prise out the upper part of the light
cover. Pull the cover free.
3
Unscrew and remove the two light bulbs.
4
Insert two new bulbs (maximum of 15 W, E14 small screw base).
5
Replace the light cover by pushing it until it clicks back into place.
6
Replace the chiller compartment by sliding it back into position.
Type B, C, D or E
1
Remove the chiller compartment (types B and E only) by:
Pulling it towards you until it meets the stop
Tilting the front up slightly and continuing to pull the
compartment towards you
2
Remove any shelves that are in front of the light cover, by:
Lifting them slightly
Pulling them towards you
3
With a flat-bladed screwdriver, prise out the lower part of the light
cover. Pull the cover free.
4
Unscrew and remove the light bulb.
5
Insert a new bulb (maximum of 15 W, E14 small screw base).
6
Replace the light cover by:
Aligning the three tabs at the top
Pushing the upper part into position first
Then pushing the lower part into position
7
Replace the chiller compartment and/or any shelves by sliding
them back into position.
TEMP CONTROL
TEMP CONTROL
13
GB