Making Ice Cubes - Samsung SR-28NMA Instruction Manual

Making Ice Cubes

The freezer contains an ice cube tray with a special device enabling
you to get the cubes out of the tray more easily.
Making Ice Cubes
1
Remove the ice cube tray by pulling it towards you.
`
2
Fill the tray with water up to the maximum water level marked on
the rear of the tray.
3
Slide the tray back into the holder, taking care not to spill the
water.
4
Wait until the ice cubes are formed.
Freezing time: It is recommended that you wait for about one
hour with the temperature set to HIGH for the ice
cubes to form.
Removing the Ice Cubes
1
Make sure that the ice cube storage bin is in place under the ice
cube tray. If not, slide it into place.
`
2
Twist one of the levers firmly in the clockwise direction until the
tray twists slightly.
Result: The ice cubes fall into the storage bin.
3 2
Repeat Step for the other half of the tray, if necessary.
4
Remove the storage bin by:
Lifting it slightly
Pulling it towards you
GB
HIGH
LOW
TEMP CONTROL
HIGH
LOW
TEMP CONTROL
11