Element Cycling; Operating The Cooking Elements; Adjust Burner Size - Monogram ZEU36 Owner's Manual

Surface elements will cycle on and off to
Element
maintain the temperature you have selected. All
Cycling
radiant surface elements have a temperature
limiter that protects the glass cooktop from
getting too hot, this is normal. The temperature
limiter may cycle the elements off more
frequently if:
Turn Burner(s) On: Touch and hold On/Off pad
Operating
about half a second. A chime can be heard with
the Cooking
each touch to any pad.
Elements
Power level can be selected in any of the
following ways:
1. Swipe the gray arc (on the graphics) to the
2. Touch Anywhere along the gray arc, or;
3. Touch + or - pads to adjust power level, or;
4. Shortcut to Hi: Immediately after turning unit
5. Shortcut to Low: Immediately after turning
The burner ring size is adjustable on some
Adjust
elements. The ring size can be selected by
Burner Size
pressing the burner ring graphic.
10
desired power level. There is no sensor on
the LEDs, or;
on, touch the + pad, or;
unit on, touch the - pad.
Using Your Cooktop
Radiant Cooktop
LED Gray Arc Swipe Area
Lights
Single Surface Dual Surface
Element Element
Gray Arc
Swipe Area
Tri-Ring Surface
Element
49-80825-1