Advertisement
QUICK START GUIDE
HITRON HT-EMN2
MoCA 2.0 WiFi Extender
Connect to the network
Connect your devices
Access the Internet
Connect to the power outlet
STEP
2
Connect the supplied 12V/1A power adapter to your HT-EMN2's
POWER port, and plug it in to a power socket.
Connect to the TV (optional)
STEP
4
Using coaxial cable, connect your TV to the HT-EMN2's TV port.
Connect with wireless devices (if any)
STEP
Your HT-EMN2's SSID (WiFi network name) and security password
6
are provided on a label located on the bottom of the device.
On your computer or other wireless device, locate and connect to
the network. In Windows 7, click the Network icon, click the
network name, then click Connect. When prompted, enter the
PassPhrase.
2.4G wireless network name
5G wireless network name
Read me
first!
ABCDEFGH
P/N:0123456789AB
MAC:AB9876543210
S/N:AB1234567890
SSID-2.4G:YZ1234567890
SSID-5G:YZ1234567890XXX
PassPhrase
PassPhrase: 9876543210YZ
IC: 10778A-HTEMN2
FCC ID: U4P-HTEMN2
Check the box contents
STEP
Look in the box and make sure you have the following:
1
HITRON HT-EMN2
POWER ADAPTOR
Note:
Connected to an existing MoCA network.
The Hitron HT-EMN2 allows you to connect Multimedia over Coax
Alliance (MoCA) devices on your building's coaxial cable network.
This guide assumes that you also have a MoCA-equipped router or
network adapter that provides Internet access to your coaxial
cable network. For more information, see
Connect to the cable port
Connect your building's coaxial cable to the HT-EMN2's Coax I/O
STEP
3
port. MoCA LED behavior will change from slow blinking to steady
if HT-EMN2 connects to MoCA-enabled router over MoCA.
Note: Please make sure MoCA-enabled router works fine in coaxial network.
Connect a computer to a LAN port (if any)
STEP
5
Using the supplied Ethernet cable, connect your computer's
network port to the HT-EMN2's LAN port.
Access the Internet
STEP
On your connected computer or device, open a browser and
7
access a website, such as www.hitron-americas.com.
If you can see the website, your HT-EMN2 is correctly set up!
ETHERNET CABLE
QUICK START GUIDE
www.mocalliance.org
Advertisement
