Adjusting The Clearance Between The Doors - Samsung RS Owner's Manual And Installation

ADJUSTING THE CLEARANCE BETWEEN THE DOORS

Adjusting the small step difference between doors.
If the door of freezer is lower than that of the
refrigerator.
Adjustment part
Please open the doors and adjust the doors as follows:
1) Release the nut ( ) on the lower hinge until the upper end of the bolt ( ).
When you release the nut( ), use enclosed hex wrench ( ) to turn the bolt( ) a little counter-
NOTE clockwise to make the nut( ) loose with your fingers.
WRENCH
NUT
BOLT
2) Please adjust the height difference between the doors turning the bolt ( ) turn clockwise(
clockwise ( ).
When you turn clockwise (
NOTE
WRENCH
BOLT
3) After adjusting the doors, turn the nut ( ) turn clockwise(
en the bolt again with wrench ( ) to fix the nut( ).
WRENCH
NUT
BOLT
If you do not fix the nut ( )firmly, the bolt ( ) may be released.
NOTE
If the door of freezer is higher than that of the
refrigerator.
), the door goes up.
) until the lower end of the bolt, then tight-
14
Adjustment part
WRENCH
NUT
BOLT
) or counter
WRENCH
BOLT
WRENCH
NUT
BOLT