REATTACHING THE REFRIGERATOR DOORS
Reattaching the Water Supply Line
1) While pressing the front face of coupler (➁), insert the water line (➀) in the coupler.
2) Tighten the screw on the clamp ( ).
1) Push the "A" collar to the "B" body and hold.
Reattaching the Front Leg Cover
Put on the front leg cover by turning the three screws clockwise, as shown in the figure.
Before attaching check water connector, be sure to check for leakage.
NOTE
a
NOTE
23
a
Tube must be fully inserted to the
marked line to avoid leaks.
FRONT LEG COVER
SCREW