Kyocera DuraForce Pro 2 Verizon User Manual page 116

4. Insert the tray into the phone, being careful not to let the cards slide out. Then gently
push the tray in until it clicks.
5. After the tray is all the way back in your phone, securely close the card slot cover.
NOTE: Make sure the SIM/microSD card slot cover is securely closed to maintain your
phone's waterproof seal.
WARNING: Do not use the phone under water with a broken or open SIM/microSD
To remove a microSD card:
1. With the phone facing down, open the SIM/microSD card slot cover.
Hook your fingernail on the rib on the tray's top edge and pull it out.
2.
3. Put the tray onto a flat surface and remove the microSD card from the tray.
4. Insert the tray into the phone, being careful not to let the SIM card slide out. Then gently
push the tray in until it clicks.
5. Securely close the card slot cover.
NOTE: You can easily damage the microSD card by improper operation. Please be
careful when inserting, removing, or handling the microSD card.
NOTE: Make sure your battery is fully charged before using the microSD card. Your
data may become damaged or unusable if the battery runs out while using the
microSD card.
Tools and Calendar
card slot cover, USB/Charger port cover or headset jack cover.
105