Safety Information - Samsung Refrigerator User Manual

Samsung refrigerator user manual
Hide thumbs Also See for Refrigerator:
Table of Contents

Advertisement

safety information

safEty inforMation
• Before operating the appliance, please read this manual thoroughly and retain it for your
WARNING
reference.
• Because these following operating instructions cover various models, the characteristics of your
refrigerator may differ slightly from those described in this manual.
WARNING
CAUTION/WARNING SYMBOLS USED
WARNING
CAUTION
OTHER SYMBOLS USED
these warning signs are here to prevent injury to you and others.
Please follow them explicitly.
after reading this section, keep it in a safe place for future reference.
• This refrigerator must be properly installed and located in accordance with the manual
before it is used.
• Use this appliance only for its intended purpose as described in this instruction manual.
• We strongly recommend that any servicing be performed by a qualified individual.
• R600a or R134a can be used as a refrigerant. Check the compressor label on the rear of
the appliance and the rating label inside the fridge to see which refrigerant is used for the
refrigerator.
• In case of R600a refrigerant, this gas is natural gas with high environmental
compatibility that is, however, also combustible. When transporting and installing the
appliance, care should be taken to ensure that no parts of the refrigerating circuit are
damaged.
• Refrigerant squirting out of the pipes could ignite or cause an eye injury. If a leak is
detected, avoid any naked flames or potential sources of ignition and air the room in
which the appliance is standing for several minutes.
Indicates that a danger of death or serious injury exists.
Indicates that a risk of personal injury or material damage exists.
Represents something you must NOT do.
Represents something you must NOT disassemble.
Represents something you must NOT touch.
Represents something you must follow.
Indicates that you must disconnect the power plug from the socket.
Represents a ground is needed to prevent electric shock.
It is recommended that this symbol be handled by service man.
_
safety information

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents