INSTALLATION OF THE REFRIGERATOR
Checking the Dimensions of your Entrance Door
• Check the dimensions of your entrance door to determine whether the refrigerator can
pass through it.
NOTE
• When refrigerator passes in door and depth or width of refrigerator is bigger, removes
refrigerator doors.
Selecting the Location for the Refrigerator
• Select a location with easy access to the water supply.
• Select a location with enough space for the refrigerator.
• Select a location without direct exposure to sunlight.
• Select a location with level floor or close to it.
• Before disassembling the freezer door, the water supply line needs to be disconnected.
(If not, the water supply line can be damaged.)
NOTE
• See "Separating the water supply line from the refrigerator" on the next page.
Allow sufficient space to circulate the air in the internal cooling system.
• When the refrigerator does not have enough space, the internal cooling system may not work correctly.
Allow clearance to the right, left, back and top when installing the refrigerator.
●
This has the advantage of reducing power consumption.
NOTE
Do not install the refrigerator where the temperature will go below 10°C.
●
10㎝
1㎝
18
5㎝