Installation Of The Refrigerator - Samsung DA68-01453B Owner's Manual And Installation Instructions

Built-in depth side by side refrigerator
Table of Contents

Advertisement

INSTALLATION OF THE REFRIGERATOR

Checking the Dimensions of your Entrance Door
• Check the dimensions of your entrance door to determine whether the refrigerator can
pass through it.
• Moving refrigerator through door if depth or width of refrigerator is bigger than door's,
NOTE
removes refrigerator doors.
Selecting the Location for the Refrigerator
• Select a location with easy access to the water supply.
• Select a location with enough space for the refrigerator.
• Select a location without direct exposure to sunlight.
• Before disassembling the freezer door, the water supply line needs to be disconnected.
(If not, the water supply line can be damaged.)
• See "Separating the water supply line from the refrigerator" on the next page.
CAUTION
Allow sufficient space to install the refrigerator on a flat surface.
• If your refrigerator is not level, the internal cooling system may not work correctly.
Loading Plan
For fitting proud of adjacent units
428mm
940mm
NOTE
CAUTION
at least 26mm
501mm
19
When you install the refrigerator, it is recommended that the
clearance be maintained as much as specified below.
To get the sufficient Energy efficiency, keep the clearance of the
back side more than 10Cm and follow the Loading Plan.
To get more space remove the upper box in the freezer and all
boxes in the fresh food compartment since it does not effect
satisfactory thermal and mechanical characteristics.
• Be careful when you openÄthe door in full
swing.ÄIt might come in contact with its adja-
cent units.
940mm
o
125
125
at least 26mm
o

Advertisement

Table of Contents
loading

Table of Contents