Table of Contents
Advertisement
INSTALLATION OF THE REFRIGERATOR
Checking the Dimensions of your Entrance Door
• Check the dimensions of your entrance door to determine whether the refrigerator can
pass through it.
• Moving refrigerator through door if depth or width of refrigerator is bigger than door's,
NOTE
removes refrigerator doors.
Selecting the Location for the Refrigerator
• Select a location with easy access to the water supply.
• Select a location with enough space for the refrigerator.
• Select a location without direct exposure to sunlight.
• Before disassembling the freezer door, the water supply line needs to be disconnected.
(If not, the water supply line can be damaged.)
• See "Separating the water supply line from the refrigerator" on the next page.
CAUTION
Allow sufficient space to install the refrigerator on a flat surface.
• If your refrigerator is not level, the internal cooling system may not work correctly.
Loading Plan
For fitting proud of adjacent units
428mm
940mm
To get the maximum energy efficiency, you had better give
enough clearance of the back side.
To get more space remove the upper box in the freezer and all
NOTE
boxes in the fresh food compartment since it does not effect
satisfactory thermal and mechanical characteristics.
CAUTION
at least 26mm
501mm
19
• Be careful when you open the door in full
swing. It might come in contact with its adja-
cent units.
940mm
o
125
o
125
at least 26mm
Advertisement
Table of Contents
