To Select The Source; To Edit The Input Source Name - Samsung HL-T5075S Owner's Instructions Manual

To Select the Source

Use to select TV or other external input sources connected to the TV.
Use to select the input source of your choice such as DVD players, VCRs, etc.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Input, then press the ENTER button.
2 Press the ENTER button to select Source List.
Press the ▲ or ▼ button to select signal source, then press the ENTER button.
➢
You can choose between the following sets of jacks: TV, AV1, AV2, S-Video1,
S-Video2, Component1, Component2, PC, HDMI1, or HDMI2 on the TV's side panel.
➢ HDMI1 or HDMI2 input can only be selected when the external device is turned on and
connected via HDMI.
➢
You can choose only those external devices that are connected to the TV.
Press the SOURCE button on the remote control to view an external signal source.
Press the INFO button on the remote control to see the current input source.

To Edit the Input Source Name

Name the device connected to the input jacks to make your input source selection easier.
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Input, then press the ENTER button.
Press the ▲ or ▼ button to select Edit Name, then press the ENTER button.
2 Press the ▲ or ▼ button to select AV1, AV2, S-Video1, S-Video2, Component1,
Component2, PC, HDMI1, or HDMI2 input jack, then press the ENTER button.
3 Press the ▲ or ▼ button to select VCR, DVD, D-VHS, Cable STB, HD STB, Satellite STB,
PVR STB, AV Receiver, DVD Receiver, Game, Camcorder, DVD Combo,
DVD HDD Receiver, PC, Internet TV Recv., Interactive TV Recv., VOD STB, or TV input
source, then press the ENTER button.
Press the EXIT button to exit.
English - 26