Samsung HL-S4676S Owner's Instructions Manual page 34

Operation
4
Press the ... or † button to select the
Antenna connection, then press the
ENTER button.
• Air : "Air" antenna signal
Cable : "Cable" antenna signal
Air+Cable : "Air" and "Cable"
antenna signals
When selecting Cable TV system:
Press the ENTER button to start the auto
program. By default, the cable TV system
is set to "STD".
If you want to select another type of
cable system, press the œ button and
use the ... or † button to select
"STD", "HRC" or "IRC".
Press the ENTER button.
• STD, HRC and IRC identify various types of cable TV systems.
Contact your local cable company to identify the type of cable system
that exists in your particular area.
At this point the signal source has been selected.
5
Press the √ button to select "Start", then
press the ENTER button to start the auto
program. The TV begins memorizing all
available stations. Press the ENTER button
at any time to interrupt the memorization
process.
Press the EXIT button to exit.
• The TV must be connected to an
antenna in order to receive digital TV
signals. Even if a particular channel
is deleted from the memory, you can
always tune to that channel directly
by using the number buttons on the
remote control.
NOTE
• All available DTV and Analog channels are automatically stored
in memory.
English - 34
Auto Program
Selects the antenna to execute the Auto
Program function.
Air Start
Cable
Start
Air+Cable
Start
Move Enter
Auto Program
Selects a cable signal type for your location.
STD Start
HRC
IRC
Move Enter
Auto Program
Selects a cable signal type for your location.
STD Start
HRC
IRC
Move Enter
Auto Program
Auto program in progress.
Cable 26
37%
Stop
Enter
Return
Return
Return
Return