Samsung HL-S4676S Owner's Instructions Manual page 131

• For replacement, you will need a 5.91-Inch screwdriver and a pair of gloves.
Unplug the TV, then use a
1
screwdriver to remove the
screws.
Remove the Lamp cover.
2
Push the clip and pull down
3
the Lamp holder.
Separate the Lamp from the
4
engine by holding the handle
and pulling it out.
NOTES
• Be sure the replacement Lamp is the same type.
• After replacing the lamp, align the lamp cover with the groove and secure the screws.
• The TV will not turn on if the lamp cover is not correctly closed (as this will activate the protective
circuit).
English - 131