Advertisement
Installing the Module
Delivery Check
The option package contains:
• MREL-01 module
• Grounding stand-off
• Panel port adapter
• Warning stickers in several languages
• This manual
Mounting
WARNING! Follow the safety instructions given in this guide and
in the ACS310 or ACS350 User's Manual.
To mount the MREL-01 module:
1. If not already off, remove mains power from the drive.
2. Remove the control panel or panel cover. (See instructions in the
drive User's Manual.)
3. Remove the grounding screw in the top left corner of the drive's
control panel slot and install the grounding stand-off in its place.
4. Ensure that the panel port adapter is attached to either the panel
port of the drive or the mate part of the MREL-01 module.
5. Gently and firmly install the MREL-01 module to the drive's panel
slot directly from the front.
NOTE! Signal and power connections to the drive are
automatically made through a 6-pin connector.
6. Ground the module by inserting the screw removed from the drive
in the top left corner of the MREL-01 module. Tighten the screw.
7
Installation
Advertisement
