Chapter 8. Control Commands - Samsung SRP-250 Series Operator's Manual

Chapter 8. Control Commands

Command Notation
[Name]
[Format]
[Range]
[Description]
Explanation of Terms
LSB
HT
[Name]
[Format]
[Description]
LF
[Name]
[Format]
[Description]
CR
[Name]
[Format]
[Description]
This command prints the data in the print buffer and does not feed the paper.
Sets the print starting position to the beginning of the line.
The name of the command.
The code sequence.
ASCII indicates the ASCII equivalents.
Hex indicates the hexadecimal equivalents.
Decimal indicates the decimal equivalents.
[ ] k indicates the contents of the [ ] should be repeated
k times.
Gives the allowable ranges for the arguments.
Describes the function of the command.
Least Significant Bit
Horizontal tab.
ASCII HT
Hex 09
Decimal 9
Moves the print position to the next horizontal tab position.
Print and line feed.
ASCII LF
Hex 0A
Decimal 10
Prints the data in the print buffer and feeds one line
based on the current line spacing.
Print and carriage return.
ASCII CR
Hex 0D
Decimal 13
This command is set according to the DIP switch 1-1 setting
at power-on. This command is only available with a parallel
interface.
23