Download Print this page

Advertisement

S
ervice Manual
Model: WWI206
Fully Automatically Washing Machine
documentation is only intended for qualified technicians who are aware of the respective
safety regulations.
W
hirlpool Customer Service
Contents
1、Precautions ------------------------------2
2、Specifications ---------------------------3
3、Installation -------------------------------4
4、Washing program ---------------------6
5、Wiring Diagrams ------------------------7
6、Trouble shooting ------------------------8
7、Exploded Views -------------------------15
8、Parts list ----------------------------------17
This

Advertisement

loading

Summary of Contents for Whirlpool WWI206

  • Page 1: Table Of Contents

    Customer Service ervice Manual Model: WWI206 Contents 1、Precautions ------------------------------2 2、Specifications ---------------------------3 3、Installation -------------------------------4 4、Washing program ---------------------6 5、Wiring Diagrams ------------------------7 6、Trouble shooting ------------------------8 7、Exploded Views -------------------------15 8、Parts list ----------------------------------17 Fully Automatically Washing Machine This documentation is only intended for qualified technicians who are aware of the respective...
  • Page 2: 1、Precautions

    1.Precautions When performing trouble-shorting and part replacement during service operation, be sure to note the following precautions for safety reasons. 1-1.Safety Precautions 1-1-1.Do not use Non-genuine parts The components of this washing machine have safety-features such as non-combustibility and voltage withstanding.
  • Page 3: 2、Specifications

    2.Specifications Model: WWI206 2-1 Detention Height 54.9 Width 53.7 Depth 2-2 Weight Net weight 2-3 Standard specification 220   10%/60 Voltage V/Hz Load after connection about 0.33 Safety fuse 2-4 Specification of tub and basket Rinse rounds/m Spine rounds/m Cloths load (maximum) 4.2 dried (maximum)
  • Page 4: 3、Installation

    3-1.Installation * Open the box and take out the silent base. * Insert the silent base with smooth face downward and slot it under the back portion of machine. * Keep silent base intact while machine is operation and after use. * Find a screw from document pack and screw the silent base into the screw hole on the base of the machine.
  • Page 5 3.5 Adjusting the direction of drain hose The method how to adjust the direction of drain hose is showed in the following pictures; Adjust the direction of drain hose. Release the screw on the water outlet and push it in wards. When placing the machine lopsided, do not hurt the power cord and clips.
  • Page 6: 4、Washing Program

    4.Washing Procedure 4-1.Automatic Program Program Soak Wash First Second rinse Spin Remark (min) (min) rinse (min) (min) Achieve ideal washing effect for thicker Heavy and heavily soiled laundry items with grease, such as Jean and working clothes. Standard Clean normal laundry items. Delicate For delicate fabrics, such as woolen and silk...
  • Page 7: 5、Wiring Diagrams

    5.Wiring Diagrams WWI206 color Starting point End point pink Water level switch pink Water level switch black Motor Power cord (L) brown Water inlet valve Power cord (L) yellow Lid switch blue Water inlet valve yellow Lid switch white Fuse...
  • Page 8: 6、Trouble Shooting

    6、Trouble Shooting 6-1、No power No power ? Check power plug and wire. Is there power supply? Is the fuse Replace blown ? connect Check and adjust it. of PCB soft? Power switch is Adjust or replace wrong? Attention : When you face such problem, you should check if there is Check the PCB power in customer's home frist.For example, wire, plug, fuse.
  • Page 9 6、Trouble shooting 6-2、Water supply error Water does not go in Open the faucet ,press the button. Is the start/ hold button pressed? Is there water Check Does the valve make supply? beep Clean the filter with a toothbrush Is there foreign Is the connection of valve material all right?
  • Page 10 6、Trouble shooting 6-3、Water inlet doesn't stop when it gets normal level Inlet doesn't stop Valve make a beep Replace PCB. sound? Is the air hose bent or Repair or replace it. leak? Replace pressostat. Is the switch of pressostat wrong? Is there foreign material Replace in valve?
  • Page 11 Check the connection between the PCB 6、Trouble shooting 6-4、No washing No washing? Is the capacitor all Replace right? Is the connection of Connect it securely. motor soft? Is the belt soft? Adjust or replace. Is switch of pressostat all Check air hose or replace pressostat. right? Is the connection of Adjust it securely.
  • Page 12 6、Trouble shooting 6-5、Noise when washing and spinning Noise? level it again. Is the washer level completely? Is there foreign Noises from tub? material Take it out Check the screws of Blanca ringer impeller Is sound from transmission? Replace gear box Check :1.If the belt all right.
  • Page 13 6、Trouble shooting 6-6、No draining Is the drain valve Remove the foreign material . jammed? Is the drain motor all Replace right? Is the outlet of the tub Take out the drain tub and removethe foreign material completely. clogged? Is safety switch all Connect it security.
  • Page 14 6、Trouble shooting 6-7、No spinning Does the washer Pls. solve it first, account P14 drain? Is the cloths out of Pls order the cloths equality. balance? Is the voltage too low? Wait power became normal. <170V Is the safety switch all Replace it.
  • Page 15: 7、Exploded Views

    7. Exploded Views...
  • Page 17: 8、Parts List

    8.Part list Description PART NO. C304189 DRIVE HUB BASKET C302543 C301893 LINT FILTER TOWER C303282 IMPELLER ASSY BALANCE RING ASSY C303874 C304679 CABINET REAR PANEL C302478 FRONT SUSPENSION ASSY REAR SUSPENSION ASSY C302479 C301485 SPILLAGE TUBE C304026 AIR HOSE ASSY TUB RING C303426 C303764...