Loading A Stack Of Paper - Samsung ML-5000A Setup Manual

02-Printing 7/16/99 6:30 PM
12
Set Up
Page 2

Loading a Stack of Paper

For best results, use high quality 75g/m
1. Pull the extender on the automatic paper feeder up, until it stops.
2. Before loading the paper, flex the sheets back and forth to loosen
them, then fan them. Tap the edges on a table top to straighten
them. Doing this before you load paper helps prevent paper jams.
DonÕt load too much. This feeder holds up to 150 sheets.
3. Insert the paper in the paper feeder.
If the paper has a preferred print side, place the print side facing
you. If you use letterhead paper, load the paper with the letter-head
edge down and facing you.
(20 lb) xerographic paper.
2