Cleaning; Replace The Batteries; Instrument Return; Returned Material Procedure - GE Druck DPI611 User Manual

User Manual

1.15.1 Cleaning

Do not use solvents or abrasive materials.
Clean the case and display with a lint-free cloth
and a weak detergent solution.

1.15.2 Replace the Batteries

1.16

INSTRUMENT RETURN

1.16.1 Returned Material Procedure

1.16.2 Safety Precautions

Page 25 of 79
To replace the batteries, See Section 1.8.2. Then re-attach
the cover.
All the configuration options stay in memory.
If the instrument is unserviceable and requires a repair
return to a GE Service Center or approved Service Agents.
Web site:
www.ge-mcs.com
Contact the GE Service Center, either by phone, fax or
E-mail to obtain a Returned Material Authorization (RMA)
number, providing the following information:
Product (i.e. Druck DPI611)
•
Serial number
•
Details of defect/work to be undertaken
•
Operating conditions
•
Provide information if the product has been in contact with
any hazardous or toxic substances and, the relevant MSDS
[EN] English – K0571 Issue 1
Druck DPI611