Control Panel Overview - Samsung ML ML-1630 User Manual

Shows the current status and prompts during an operation. The message shows with specific LEDs as below. LEDs are working with short
message on a display.
• error LED
Blinks when the error occurs on your machine. If it blinks rapidly, the machine has stopped for some reason. Check the display message to
solve the problem.
• paper LED
Blinks when the paper in the tray is empty.
1
• toner LED
Blinks when the toner cartridge is almost empty or is not Samsung-genuine cartridge. If it blinks rapidly, the toner cartridge is totally empty.
Check the display message and replace the toner cartridge.
• paper jam LED
Lights blink when there is a paper jam in the machine. Check the display message to release the jammed paper.
See page 7.7 about more information on the display messages.
2
Stops an operation at any time. Also, You can print a machine report by pressing this button for about 4 seconds.
3
You can power on or off the control panel by pressing and holding this button for a few seconds.

Control panel overview

display
1.4
<Introduction>