Network Menu (Clp-650N Only) - Samsung CLP-650 Series User Manual

Network Menu (CLP-650N only)

This menu lets you configure the network interface card
installed in your printer according to how the network is set up.
You can upgrade the network interface card firmware, and print
the configuration. (*: the default setting)
Item
Options: Yes, No
Config Network
Sets whether or not you configure the network. If
you select Yes, you can configure the TCP/IP,
Netware and AppleTalk menus.
Options: Yes, No
Select whether you set the IP address or not.
If you select Yes, you can configure the IP
Config TCP
address.
If you select Yes, the IP Get Method option
appears on the display. You can select how to get
the IP address.
Options: Static, BOOTP, DHCP
You can set this item only when you set the
Config TCP to Yes.
• Static: You can enter an IP address,
IP Get Method
subnetmask, and gateway manually.
• BOOTP: The BOOTP server allots an IP address
to you automatically.
• DHCP: The DHCP server allots an IP address to
you automatically.
You can select this item only when you set IP
Get Method to Static. This item lets you enter
an IP address manually. Press the scroll button to
set the value of the 1st byte between 0 and 255,
IP Address
and then press the Enter button.
Set the value for the 2nd, 3rd, and 4th byte the
same way.
You can set this item only when you set IP Get
Method to Static. This item lets you enter a
subnet mask manually. Press the scroll button to
set the value of the 1st byte between 0 and 255,
Subnet Mask
and then press the Enter button.
Set the value for the 2nd, 3rd, and 4th byte the
same way.
Explanation
Using the Control Panel
Item
Gateway
AppleTalk
Netware
Config Netware
IPX Frame Type
Reset Network
Default Set
3.8
Explanation
You can set this item only when you set IP Get
Method to Static. This item lets you enter a
gateway manually. Press the scroll button to set
the value of the 1st byte between 0 and 255, and
then press the Enter button.
Set the value for the 2nd, 3rd, and 4th byte the
same way.
Options: On, Off
You can select whether or not to use the
AppleTalk for Macintosh. If you select On, you can
use the AppleTalk.
Options: On, Off
You can select whether or not to use the Netware
protocol.
If you select On, you can access the Config
Netware menu item.
In the Config Netware menu, you can specify
the frame type parameter used on your network.
Options: Yes, No
You can set this item only when you set
Netware to On. This item lets you select
whether or not you set the frame type parameter.
Select Yes to select the frame type.
If you select Yes, the IPX Frame Type option
appears on the display.
Values: Auto, EN_8022, EN_8023, EN_II,
EN_SNAP
You can select this item only when you set
Config Netware to Yes. This item lets you
select the IPX Frame Type.
• Auto: You can set a frame type automatically.
• EN_8022: Select this value to use the IEEE
802.2 frame type.
• EN_8023: Select this value to use the IEEE
802.3 frame type.
• EN_II: Select this value to use the ETHERNET
II frame type.
• EN_SNAP: Select this value to use the SNAP
frame type.
This item reboots the network interface card.
This item performs a simple reset and restores
the factory default settings for the network
configuration.