Setting The System - Samsung YP-MT6 Owner's Manual

Setting the System

Press and hold the "M" button. Select Settings
√ √
Resume
Use , to select Resume On or Off.
On: Play back will resume from the point it was
previously stopped.
Off: Play back will resume from the beginnng of the
file/track that was playing when stopped.
√ √
Default vol
Use , to set the default volume to a level between
0 and 30.
If the power is turned on again after having adjusted the
volume to a level above the default volume
(for example: 20) music is played at the default volume level.
If the power is turned on again after having adjusted the volume at or below the default
volume (for example: 20 or lower), the music is replayed at the previous volume.
√ √
Tuner Region
Use , to select FM Tuner Region.
Worldwide : Search FM frequency between 87.5MHz to
108.00MHz in increments of 50 KHz.
US : Search FM frequency between 87.5MHz to108.0MHz in
increments of 100 KHz.
Japan : Search FM frequency between 76.0MHz to 108.0MHz
in increments of 100 KHz.
48
System.
√ √
Tuner Level
Use , to select FM Tuner Sensitivity.
The higher the FM Tuner Sensitivity,
the more frequency it can receive .
High Middle Low
√ √
Default Set
Use , to select Default Set Yes or No.
Yes : All settings selected will revert back to the player
default settings.
No : All settings selected will remain as they are.
√ √
Beep
Use , to select Beep On or Off.
On: Beep sounds whenever you press the button.
Off: No beep sounds when you press the button.
√ √
About
If you select About, you can check the software
version information, total number of tracks and
remaining capacity.
N N o o t t e e
N N o o t t e e
- Go to samsung.com for software updates.
Setting the System
49