Sound Control; Default Volume; Wow Level; Encode Bit Rate - Samsung YP60V Manual

Setting the Environment

SOUND CONTROL

Select SOUND in ENVIRONMENT.

WOW LEVEL

The levels of SRS and TRUBASS
can be adjusted.
Use the , buttons to select the
level you want.
The level for SRS and TRUBASS can
each be set within the range of 0 to 10.
If OPTIMIZATION is selected, the SRS function is
optimized to the connected device.
Set the desired device to earphone, headphone,
speaker or carpack (car cassette adapter)
by using the , buttons.
58
SRS LEVEL TRUBASS LEVEL
8 Level 8 Level
OPTIMIZATION
EARPHONE
HEADPHONE
CARPACK

ENCODE BIT RATE

Use the , buttons to set the desired MP3
encoding bit rate.
You can set the desired bit rate to 64kbps, 96kbps or
128kbps when doing MP3 encoding.
BEEP ON/OFF
Use the , buttons to set the BEEP mode.
BEEP ON : A beep sounds each time a button is
pressed.
BEEP OFF : No beep sounds when a button is pressed.

DEFAULT VOLUME

Use the , buttons to set the DEFAULT VOLUME.
It is possible to set the default volume to a value
between 0 and 40. If the power is turned on again after
having adjusted the volume above the default value,
music is played at the default volume.
If the power is turned on again after the volume was set to
within the default value, the music is replayed at the
previously played volume.
ENCODE BIT RATE
96 kbps
BEEP ON/OFF
ON
OFF
DEFAULT VOLUME
22
59