Programming The Remote Control For Other Components - Samsung SIR-T351 Owner's Instructions Manual

MD68-00XXXA(E)-CHAPTER 4
4
4
CHAPTER FOUR
Special Features

Programming the Remote Control for Other Components

4/4/03 11:15 AM Page 45
Press the appropriate button among the Component Selection
1
buttons to activate another component (STB, TV, VCR, CATV,
DVD).
For example, if you want to program the remote control to
operate your VCR, press the VCR button on the remote control.
Press the SET button on the remote control. The LED for the
2
active component will light for 30 seconds. Use the number
buttons to enter the code by manufacturer.
(See tables on pages 44~46)
Each code must be three digits long. For example, to enter the
code "6," press 0, 0, and 6. To enter the code "76," press 0,
7, and 6.
See the remote control code tables on the following pages to
find the appropriate code for your particular component.
If more than one number is listed, try each one separately until
you find the one that works.
45