Connection To A Tv (S-Video) - Samsung DVD-V9650 Instruction Manual

Connection to a TV
- Connecting to your TV using an S-Video cable.
- You will enjoy high quality images. S-Video separates the picture element into black and white(Y) and
color(C) signals to present clearer images than regular video input mode. (Audio signals are
delivered through the audio out or line out audio).
1
Using an S-Video cable (not included), connect
the S-VIDEO OUT terminal on the rear of the
DVD-VCR to the S-VIDEO IN terminal of your
2
Using the audio cables, connect from the AUDIO
OUT or LINE OUT AUDIO (red and white)
terminals on the rear of the DVD-VCR to the
AUDIO (red and white) IN terminals of your
Turn on the DVD-VCR and TV.
3
With the unit in stop mode, set the Alt video
output to COMPOSITE/S-Video
Setup menu (see pages 63~64) or press the
P.SCAN button on the front panel until
output.
4
Press the input selector on your
control until the S-Video signal from the DVD-
VCR appears on your TV screen.
Notes
- If you want to connect to an Amplifier, please refer to the Amplifier connection page. (See pages 21 to 22)
- The number and position of terminals may vary depending on the TV set.
Please refer to the user's manual of your TV.
- The S-Video jack only outputs video from the DVD player. To view video from the VCR, you must have the
Video Out (Yellow) or RF Out jack connected.
- You can hear sound from
VCR audio only outputs through the Line Out Audio jacks (Red,White).
C
O N N E C T I O N S
(S-Video)
in the Display
S-Video is
TV remote
LINE OUT AUDIO
TV.
TV.
Audio Cable
or AUDIO OUT (red and
ENG-16
White Red
Red White
white) terminals for S-Video connection.
S-Video Cable
(not included)