Pentax IQZoom 115-S Operating Manual page 11

Cf
FILNI
LOADING
rEnsure rhe por+er is off before inserting the film.r
Place the film cartridge in the film chamber by fitting
its flat side on top of the rewind shaft first and then
slide the top end into the camera.
Pull the film leader out far enough from the cartridge
to reach the take-up spool Q. Align the tip of the
film with the film leader end mark O.
I Slide the back cover release lever down in the
direction of the arrow to open the back cover as
illustrated.
Notes:
. Ensure the film is placed properly between the guide
rails G).
. If there is dirt on the film detector @ , film cannot be
wound properly.
C Flat YES!
x Slack
NO!