Advertisement
System wiring instructions
P-W1208 and P-W1008
woofer
I
amplifier packages.
Wiring the Amplifier to the Woofer enclosure.
Wire the Amplifier in the bridged configuration.
Bridged Configuration
,---- BRIDGED ----,
SPEAKER OUTPUT
0
LEFT
8
8
RIGHTO
Woofer Box
connection
Wire the amplifier according to the
instructions provided. Use the bridged
connection method when connecting the
woofer enclosure to the amplifier. This uses
both channels of the amplifier to power the
single speaker providing the best power
I
performance.
System set up and adjustments
Once connected, set the Filter to LPF. Using a
good music source, adjust the gain to match the
bass to the full Range speakers. Experiment with
the placement of the enclosure. Sometimes
facing the enclosure towards the back of the
vehicle can increase bass.
If you have problems or questions
wiring, call 1-800-536-9663
Set this switch to the
FILTER
~~
[,!:~!)
LPF setting (Low Pass
- - - - - -
r-1
KENWOOD
Filter)
Adjust the gain control so that at full
volume the woofer doesn't distort.
Advertisement
