Product Information; Eu Declaration Of Conformity; Product Description; Usage - Bosch EasyControl Installation And Operating Instructions Manual

CAUTION:
Damage due to incorrect connection.
The device may be damaged if this product is connected incorrectly.
▶ Only have the product installed by an authorised professional.
2

Product information

2.1

EU Declaration of Conformity

The design and operating characteristics of this product
comply with the european and national requirements. Its
conformity with harmonised European standards is declared
by the CE marking.
You can request the EU Declaration of Conformity for the product. See
the contact address on the back cover of these instructions.
2.2

Product Description

You can set the required temperature of a room easily and precisely (to
the nearest half degree) using the Control app. Thanks to the sensors
integrated in the thermostat, you can quickly set a temperature in each
room that is comfortable for you. A time-controlled temperature
program can also be set for every room. An automatic frost protection
program starts at temperatures below 4 °C. The smart radiator
thermostat also regularly opens the radiator valve to prevent
calcification.
2.3

Usage

The product is intended exclusively for installation on radiators
(including convectors and skirting heating) indoors. To ensure the
product works properly, it must be used together with the EasyControl.
▶ Make sure the product is adjusted correctly by following the safety
instructions and other directions in these operating instructions and
in the EasyControl app.
▶ The technical data must be taken into account.
▶ Avoid installation in areas exposed to intense sunlight or in dust-
laden environments.
▶ Do not make any modifications to the product.
2.4

Product overview

1
2
3
4
Fig. 1
Articles Explanation
1. Mode key "0" Operation mode setting
2. Minus key "-" Reduction of set temperature
3. LED display Display of operation and fault displays
4. Plus key "+" Increase setting temperature
5. Display Display of settings, values, processes, operating
and fault displays
Table 2
EasyControl – 6720881858 (2017/10)
5
10016436-001
2.5

Specifications

Model of MS
Batteries
Battery service life
Power consumption
Receive category
Transmit frequency
Transmit strength
Wireless range (outdoors)
Duty cycle
Radiator valve connection
Protection
Mode of operation
Pollution degree
Environment temperature
Humidity
Dimensions
(width x height x depth)
Weight (excluding batteries)
Table 3
2.6

Wireless connection faults

Faults in the wireless connection (due to electric motors or faulty
electrical appliances, for example) cannot be entirely ruled out. The
transmission range indoors may deviate significantly from the
transmission range outdoors. In addition to the transmitter power and
receiver properties, environmental effects such as moisture and
structural aspects can impair the performance of the wireless
connection.
Product information
Thermostat AA
2 x LR6/AA
≥ 2 years
≤ 120 mA
SRD category 2
868.3 MHz, 869,525 MHz
≤ 10 mW
≤ 100 m
@ 868.3 MHz < 1% per hour
@ 869,525 MHz < 10% per hour
M30 x 1.5 mm
IP20
Type 1
2
0 °C to 50 °C
5% to 80%
48 mm x 57 mm x 103 mm
140 g
3