Access Covers
Engine Cover
d
WARNING:
Do not keep the access covers open when the
machine is parked on a slope, or while the wind
is blowing hard. The access covers may close
accidentally, possibly resulting in personal injury.
When opening or closing the access covers, take
extra care not to catch in fingers between the base
machine and the access covers.
Pull up latch (2) to open cover (1). Cover (1) is raised by link
mechanism (3). Be sure to fully raise cover (1). After checking
that stopper (4) provided on the left link is placed in LOCK
position (5), remove your hand from cover (1). Cover (1) will be
locked in place.
When closing cover (1), while raising cover (1), push stopper
(4) at the arrowed position (a)
While pushing stopper (4), lower cover (1). When cover (1) is
lowered by the 1/4 stroke, leave stopper (4).
Then, lower cover (1) further to completely close it.
Be sure to completely remove your hand, which is pushing
stopper (4), out of cover (1) at this time. Failure to do so may
cause your hand to be caught in cover (1), possibly resulting in
severe injury.
MAINTENANCE
to disengage the lock.
3
4
5
7-8
1
2
Lock Position
4
a
MADB-07-002
MADB-00-004
MADB-07-003
5
M1M7-07-069