Cisco Nexus 9000 Series Configuration Manual page 40

Configuration Examples for ITD
switch(config-itd)#
switch(config-itd)# show itd
Legend:
ST(Status): ST-Standby,LF-Link Failed,PF-Probe Failed,PD-Peer Down,IA-Inactive
Name
-------------- ---------- -------- -------
test
Exclude ACL
-------------------------------
Device Group
-------------------------------------------------- ----- ------
dg
Pool
------------------------------ ------------ ------ ---------
test_itd_pool
Node
------------------- ------- --- ---- ----- --------------- -- --- -------
1
Bucket List
--------------------------------------------------------------------------
test_itd_bucket_1, 4
Node
------------------- ------- --- ---- ----- --------------- -- --- -------
2
Bucket List
--------------------------------------------------------------------------
test_itd_bucket_2
Node
------------------- ------- --- ---- ----- --------------- -- --- -------
3
Bucket List
--------------------------------------------------------------------------
test_itd_bucket_3
switch(config-itd)#
# Brought down Node 3, and the failed node buckets are send to Node 2.
switch# show itd
Legend:
ST(Status): ST-Standby,LF-Link Failed,PF-Probe Failed,PD-Peer Down,IA-Inactive
Name
-------------- ---------- -------- -------
test
Exclude ACL
Cisco Nexus 9000 Series NX-OS Intelligent Traffic Director Configuration Guide, Release 9.x
32
LB Scheme Status
src-ip ACTIVE
Interface
Eth1/1
IP Cfg-S WGT Probe Port
1.1.1.1 Active
IP Cfg-S WGT Probe Port
2.2.2.2 Active
IP Cfg-S WGT Probe Port
3.3.3.3 Active
LB Scheme Status
src-ip ACTIVE
Buckets
4
Probe
ICMP
Status Track_id
UP 1
Probe-IP
1 ICMP
Probe-IP
1 ICMP
Probe-IP
1 ICMP
Buckets
4
Configuring ITD
Port
STS Trk# Sla_id
OK 2 10002
STS Trk# Sla_id
OK 3 10003
STS Trk# Sla_id
OK 4 10004