Setting the Clock
For each step, you have a few seconds to set the required options.
If you exceed this time, you must start again.
1
Switch the system
on by pressing
POWER button.
3
Press ENTER.
The hour flashes.
•
Increase the hours :
•
Decrease the hours :
When the correct
5
time is displayed,
press ENTER.
•
"TIMER" appears in the display.
•
The current time is now set.
You can also use Multi-Jog or
•
Note
instead of
,
buttons in step 3,4.
17
2
Press TIMER/CLOCK
twice.
•
CLOCK is displayed.
When the correct
4
hour is displayed,
press ENTER.
The minutes flash.
•
Increase the minutes :
•
Decrease the minutes :
Note
•
You can display the time, even
when you are using another
function, by pressing
TIMER/CLOCK once.
button on the panel front
Checking the Remaining Time
Press the REMAIN button.
•
For checking the total and remaining time of a title or chapter being played.
Each time the REMAIN button is pressed
TITLE ELAPSED
TRACK ELAPSED
VCD
TITLE REMAIN
TRACK REMAIN
DVD
CD
CHAPTER ELAPSED
TOTAL ELAPSED
CHAPTER REMAIN
TOTAL REMAIN
TRACK ELAPSED
MP3
TRACK REMAIN
18