Download Print this page
Lorex LNB9232 Series Quick Start Manual

Lorex LNB9232 Series Quick Start Manual

4k ultra hd ir bullet ip camera

Advertisement

Quick Links

Package Contents
• 4K Ultra HD IR Bullet IP Camera
• Mounting Kit*
• Mounting Template*
• Ethernet Extension Cable with Pre-attached RJ45 Cable Gland*
* Per camera in multi-camera packs.
ATTENTION:
It is recommended to connect the camera to the NVR or an external PoE
switch. If using a DC power adapter (not included) with the camera, a
REGULATED power supply is REQUIRED for use with this camera. Use of
a non-regulated, non-conforming power supply can damage this product
and voids the warranty.
Safety Precautions
• Use the camera only with compatible Lorex NVRs.
• Read this guide carefully and keep it for future reference.
• Follow all instructions for safe use of the product and handle with care.
• Use the camera within given temperature, humidity and voltage levels
noted in the camera's specifications.
• Do not disassemble the camera.
• Do not point the camera directly towards the sun or a source of
intense light.
• Use only a regulated power supply with the product (optional). Use of a
non-regulated, non-conforming power supply can damage the product
and void the warranty.
• Periodic cleaning may be required. Use a damp cloth only. Do not use
any harsh, chemical-based cleaners.
• The supplied cable is rated for surface mounting only. Cables for in-wall
and floor-to-floor installations are sold separately (CMR type). These
and other cables are available at lorex.com.
Using the RJ45 Cable Gland (Optional)
The RJ45 cable gland covers the camera's Ethernet connector and the RJ45 plug to
provide weather-resistance and protection from dust, dirt and other environmental
contaminants.
The RJ45 cable gland is pre-attached to the
included Ethernet extension cable.
RJ45 Cable Gland
To use the RJ45 cable gland:
Twist the RJ45 cable gland barrel securely onto the camera Ethernet connector.
RJ45 Cable
Camera Ethernet
Gland Barrel
Connector
NOTE: The RJ45 cable gland is weather-resistant. Seal the cap with silicone and/or
electrical tape for additional sealing if it will be exposed to precipitation regularly.
Cable Extension Options
Extend the Ethernet cable run for your camera up to 300ft (92m).
See table below. It is recommended to use UL CMR approved cables
available at lorex.com.
Max Cable Run
Cable Type
Distance
CAT5e (or higher) Ethernet cable
300ft (92m)
• You can use a RJ45 coupler or switch (not included) to connect male
ends of Ethernet cable together.
• To extend the cable run beyond 300ft (92m), a switch will be required
(sold separately).
Resources
Need Help?
Visit us online for
up-to-date software and
complete instruction manuals
1
Search for the model number
2
Click on your product in the
3
4
Click on the Downloads tab
Dimensions
3.1" / 78mm
Installation Tips
Ethernet
• Point the camera where there is the least amount of obstructions (i.e., tree
Extension
branches).
Cable
• Install the camera where vandals cannot easily reach.
• Secure cabling so that it is not exposed or easily cut.
• This camera is rated for outdoor use. Installation in a sheltered location is
recommended.
Disclaimers
• For a full list of compatible recorders, visit lorex.com/compatibility.
• Not intended for submersion in water. Installation in a sheltered location
recommended.
• This camera includes an Auto Mechanical IR Cut Filter. When the camera changes
between Day/Night viewing modes, an audible clicking noise may be heard from
the camera. This clicking is normal, and indicates that the camera filter is working.
• For optimal remote viewing from your recorder, an upload speed of 256kbps per
camera is required (default setting). For example, your Internet service package
must support 2Mbps or greater upload speed for 8 cameras, 4Mbps or greater
for 16 cameras, and 8Mbps or greater for 32 cameras (your Internet service
provider can confirm your upload speed). You may lower the resolution and
bitrate of camera video streams to further boost performance for slower Internet
connections. See your NVR's user manual at
Max # of
"Configuring Recording Quality" section).
Extensions
3
Copyright © 2018 Lorex Corporation
As our products are subject to continuous improvement, Lorex reserves the right
to modify product design, specifications and prices, without notice and without
incurring any obligation. E&OE. All rights reserved.
Visit lorex.com
of your product
search results
7.6" / 193mm
lorex.com
for full instructions (see
LNB9232_QSG_EN_R1
4K Ultra HD IR Bullet IP Camera

Quick Start Guide

English Version 1.0
LNB9232 SERIES
www.lorex.com

Advertisement

loading

Summary of Contents for Lorex LNB9232 Series

  • Page 1: Quick Start Guide

    • To extend the cable run beyond 300ft (92m), a switch will be required Copyright © 2018 Lorex Corporation (sold separately). As our products are subject to continuous improvement, Lorex reserves the right to modify product design, specifications and prices, without notice and without www.lorex.com incurring any obligation.
  • Page 2 Scenario 2: Connect Cameras to Local Area Network (LAN) Audio recording and listen-in audio are disabled by default. Audio recording and viewing camera different location. / or use of listen-in audio without consent is illegal in certain jurisdictions. Lorex Router Camera at night Corporation assumes no liability for use of its products that does not conform with local laws.