Kyocera GRATINA KYF37 Settings Manual

Introduction
Setting Guide
Thank you for buying the "GRATINA" (simply called the
"product" from here on).
This manual describes the settings and precautions for
using the product. For explanations of basic functions,
refer to "Basic Manual".
Company names and product names referred to in this manual
are trademarks or registered trademarks of respective
companies. The TM, ® marks may be omitted in this manual.
Illustrations and screens shown in this manual may look different
from the actual product and screens. In some cases, minor
details or a part of a screen may be omitted.
In this manual, "au Nano IC Card 04 LE" is abbreviated as "au IC card".
In this manual, "microSD™ memory card (commercially available)"
and "microSDHC™ memory card (commercially available)" are
abbreviated as "microSD memory card" or "microSD".
Sold by: KDDI CORPORATION,
OKINAWA CELLULAR
TELEPHONE COMPANY
January 2018, 1st Edition
Manufactured by: KYOCERA Corporation
When Using the Product
Note the following when using the product.
● When you purchase the product, the battery is not fully charged. Be sure to charge the battery before use.
● To maintain water and dust resistance, attach the back cover firmly.
● If a confirmation screen of conditions, etc. is displayed during the procedure for applications or functions of the
product, follow the on-screen instructions.
● If a confirmation screen of communication charges is displayed when the application or function is activated, follow
the on-screen instructions.
Basic Operation
Basic key operations are described here. For detailed operation, refer to "Basic Manual".
■ ■ Key■Names■and■Functions
Names of keys on the product and their functions are described.
①
⑧
⑫
② ⑨
③ ⑩
④
⑤ ⑪
⑥
⑦
Using the Pointer
Move the pointer on the screen up/down/left/right to operate the browser, etc.
Activate a pointer-capable function/application
" " (OFF)/" " (ON) is displayed in the status bar, and "
● Hold down z for at least 1 second to toggle the pointer ON/OFF while activating the pointer-capable function/
application.
● Key operation is still possible when the pointer is ON (except some applications).
■ ■ Pointer■Operation
Move
By pressing e/c/s/f, and you
can move the pointer up/down/
left/right. Also, by pressing e, c,
s, f same time, you can move
the pointer diagonally.
Scroll
With the pointer at the up/down/
left/right edge of the screen, move
toward off the screen using e/c/
s/f.
• By long-pressing k for more 2
seconds, the pointer changes to
" ", and you can scroll the
screen using e/c/s/f.
Preparing the Product for Use
● Always turn the power off before installing or removing the battery pack, au IC card, or a microSD memory card.
● Attach the battery pack after checking that the au IC card and microSD memory card are firmly in place.
● To maintain water resistance, firmly close the back cover without leaving any gaps.
● Attaching items improperly may result in damage to the battery pack or back cover.
■ ■ Installing/Removing■the■Battery■Pack
Installing
Remove the back cover of the back of the
product
Lift the back cover by the notch using fingertips
(fingernail, etc.) in the direction shown to remove.
Notch
Attach the back cover
Note the orientation of the back cover and place it
on the product with the product closed, and attach
the back cover.
Removing
Remove the back cover of the back of the
product
Lift the back cover by the notch using fingertips
(fingernail, etc.) in the direction shown to remove.
Notch
■ ■ Installing/Removing■the■au■IC■Card
The au IC card contains your personal information such as your phone number. The product is compatible with au
Nano IC Card 04.
● When handling the au IC card, observe the following to avoid malfunction and
damage.
au Nano IC Card 04 LE • Do not touch the IC (metal) part on the au IC card or the IC card terminals on
(Back) (Front) the product.
• Confirm the correct orientation for installing.
• Do not forcefully install or remove.
● An error message is displayed if the au IC card is not installed correctly or if it
has an abnormality.
IC (metal) part
● Be careful not to lose the removed au IC card.
● Do not insert the au IC card if in a card adapter. May cause malfunction.
● Turn the power off beforehand and remove the battery pack.
● If the au IC card is not inserted, the following operations are unavailable. "
• Making * /Receiving a call
• Sending/Receiving SMS
• Making initial e-mail settings and sending/receiving e-mail (@ezweb.ne.jp)
• Making PIN code settings
• Checking product phone number and e-mail address
Besides the above, functions which require your phone number, etc. may not be available.
* Emergency calls also cannot be made to 110 (police), 119 (fire department), or 118 (coast guard). However, calls can be
made if signal strength during GSM/UMTS overseas network is any level other than "Out of service area" (emergency
numbers depend on the country; calls may not connect).
● Restricting product use with a PIN code
Your au IC card contains valuable personal information. To protect this information, you can change the PIN code
and lock the SIM card to restrict use by other persons.
■ ■ When■Using■the■Product
Describes things to note when using the product.
■ ■ Basic■Operation
Describes basic key operations.
■ ■ Using■the■Pointer
Describes pointer operations.
■ ■ Preparing■the■Product■for■Use
Describes initial preparations.
■ ■ Initial■Settings
Set an au ID, etc. to use various services provided by au.
■ ■ Switching■to■English■Display
You can switch the display from Japanese to English.
■ ■ Setting■Wi-Fi ®
Describes how to connect to a Wi-Fi ® network.
■ ■ Checking■On-Screen■Status
Check the signal reception strength, battery level, etc.
on-screen.
■ ■ E-mail
Make initial settings for E-mail (@ezweb.ne.jp), etc.
■ ■ How■to■Transfer■Data
You can return/save data from your old au phone to the
product using a microSD memory card or au server.
■ ■ Increasing■the■Lighting■Time■of■the■Screen
You can set the time before the screen automatically
turns off.
■ ■ Adjusting■the■Brightness■of■the■Screen
You can adjust the brightness level of the screen.
■
■ Changing■Font■Size■(Character■Size)
Change the font size.
■ ■ Changing■Volume
Set the volume of ringtones, alarms, etc.
■ ■ Attaching■a■Strap
Describes how to attach a strap.
① k Center key ⑨ o Camera key
② u Phone book key ⑩ l Browser key
③ j Mail key Displays browser menu.
④ , Clear/Memo key ⑪ . Power/End call key
While using the While using the product, end
product, return to call or exit functions. Hold
the previous screen. down to turn the power on or
⑤ m Call/Pair key off.
⑥ 0 - 9, -, ^ ⑫ v Manner/Shutter key
Number keys
⑦ q - z Custom
keys 1 - 3
⑧ d Cursor key
s Left key/Incoming
history
f Right key/outgoing
history
e Up key
c Down key
" (pointer) is displayed when the pointer is on.
Select
With the pointer at buttons or
items to select, the buttons or
items are confirmed (okayed) by
pressing k.
Status bar
Install the battery pack
Confirm the position of connection, and then slide
battery pack in and press firmly into place.
Battery pack
Connection
Press firmly to make sure there are no gaps
around the back cover
Trace the circumference of the back cover in
direction ① with finger and press in direction ② to
install the back cover completely.
②
①
Remove the battery pack
Lift the battery pack by the notch of the product
using fingertips (fingernail, etc.) in the direction
shown to remove.
Notch
Battery pack
" is also displayed.
Installing
Turn the power off and remove the battery pack
• See "Installing/Removing the Battery Pack" for
how to remove the back cover and battery pack.
• Reverse the direction of the product after step 2.
Notch
Battery pack
Slide the au IC card in the direction shown in the
slot cover
Note the position of the card's notch and
orientation of IC (metal) surface.
Notch
IC (metal) surface
Removing
Turn the power off and remove the battery pack
• See "Installing/Removing the Battery Pack" for
how to remove the back cover and battery pack.
• Reverse the direction of the product after step 2.
Notch
Battery pack
Slide the au IC card in the direction shown to
remove
■ ■ Installing/Removing■the■microSD■Memory■Card
You can save/move/copy data by installing a microSD memory card (including microSDHC memory card) in the
product.
● A protective card is preinstalled. If not using a microSD memory card, leave the protective card installed in the
product to prevent parts from rattling. Be careful not to lose the removed protective card.
* The protective card can be used when a microSD memory card is uninstalled. Not installing the protective card does not
adversely affect the product.
● Turn the power off beforehand and remove the battery pack.
● A microSD memory card initialized on another device may not work on the product properly. Format the microSD
memory card on this product. Use the following steps.
From the standby screen, press k → [Settings] → [More settings] → [Storage] → [Erase SD card] → [Erase SD
card] → [Erase everything]
● Make sure that the top/bottom and front/rear of the microSD memory card are facing correctly. Trying to force a
wrongly oriented card into the slot could make it impossible to remove the card or result in damage.
● Do not touch the terminal part of a microSD memory card.
Installing
Turn the power off and remove the battery pack
• See "Installing/Removing the Battery Pack" for
how to remove the back cover and the battery
pack.
Notch
Battery pack
Slide the microSD memory card in the direction
shown in the slot cover
Note the orientation of the microSD memory card.
Remove the protective card if it is installed.
Removing
Turn the power off and remove the battery pack
• See "Installing/Removing the Battery Pack" for
how to remove the back cover and the battery
pack.
Notch
Battery pack
Slide the microSD memory card in the direction
shown to remove
If not using a microSD memory card, attach the
protective card.
■ ■ Charging
● While charging, the charging/notification indicator illuminates in red. When charging is finished, the charging/
notification indicator goes out.
● The product may become warm while charging, depending on the situation, but this is not abnormal.
● When you operate the product with the specified charger (sold separately) connected, the product may repeat
short-time charging/discharging resulting in short battery life.
● When the temperature of the environment or the product becomes extremely high or low, charging may be
stopped. Try to charge the battery at room temperature as much as possible.
● If the charging/notification indicator blinks in red, check if the phone is connected correctly, etc. Even if the
indicator keeps blinking, stop charging and then contact an au shop or Repair and Delivery Support Center.
Charging with a Specified AC Adapter (Sold Separately)
Check the orientation of the microUSB plug of
Common AC Adapter 05 (sold separately) and
insert it straight into the external connection
terminal
Charging/Notification
indicator
With the projection
facing down
Common AC Adapter 05 (sold separately)
Slide the au IC card slot cover with the pad of
your finger in direction ① and then raise in
direction ②
Be careful not to touch the metal terminals on the
product when raising the cover. Do not slide the
cover forcefully (may damage the cover or injure
hand/finger).
①
②
Lower the au IC card slot cover in direction ①,
and then slide in direction ② with the pad of your
finger until it clicks locked
If the cover is difficult to close, raise the cover again
and make sure the au IC card is installed all the way.
②
①
Slide the au IC card slot cover with the pad of
your finger in direction ① and then raise in
direction ②
Be careful not to touch the metal terminals on the
product when raising the cover. Do not slide the
cover forcefully (may damage the cover or injure
hand/finger).
①
②
Lower the au IC card slot cover in direction ①,
and then slide in direction ② with the pad of your
finger until it clicks locked
②
①
Slide the microSD memory card slot cover with
the pad of your finger in direction ① and then
raise in direction ②
Be careful not to touch the metal terminals on the
product when raising the cover. Do not slide the
cover forcefully (may damage the cover or injure
hand/finger).
①
②
Lower the microSD memory card slot cover in
direction ①, and then slide in direction ② with the
pad of your finger until it clicks locked
If cover is difficult to close, raise cover again and
make sure the microSD memory card is installed all
the way.
②
①
Slide the microSD memory card slot cover with
the pad of your finger in direction ① and then
raise in direction ②
Be careful not to touch the metal terminals on the
product when raising the cover. Do not slide the
cover forcefully (may damage the cover or injure
hand/finger).
①
②
Lower the microSD memory card slot cover in
direction ①, and then slide in direction ② with the
pad of your finger until it clicks locked
②
①
Insert the power plug of Common AC Adapter 05
(sold separately) into an outlet (100 VAC to 240
VAC)
Common AC Adapter 05
(sold separately)