Selecting The Cassette Playback Mode; Tape Counter; Recording A Compact Disc - Samsung HT-DT79 Instruction Manual

Selecting the Cassette Playback
Mode
Your micro component system has three cassette playback modes which enable
you to listen to both sides of a cassette automatically.
Press REV.MODE until the appropriate symbol is
displayed.
•
: One side of the selected cassette and then stops.
•
: One side of the cassette.
The other side of the cassette and then stops.
•
: Both sides of the cassette indefinitely until you press stop.

Tape Counter

When playing a cassette, a counter is displayed to enable you to take note of the counter value at the start of each track and thus
start playback at the beginning of the track to which you wish to listen.
Before starting to record a cassette for which you wish to take
note of the counter values at the beginning of each track, reset
the counter by pressing COUNTER RESET.
•
The counter is only displayed when a cassette is being played.
55

Recording a Compact Disc

You can record a compact disc on a cassette in two different ways:
Synchronised recording
This feature enables you to synchronize the start of the recording with the start of the disc or track of your choice.
Switch the system
1
2
Insert a blank
on by pressing
cassette in Deck.
POWER.
•
Press the PUSH/EJECT button (
to open the cassette door, insert a
cassette, and then close the cas-
sette door.
•
Insert the cassette with the safety
tabs.
Press and hold
4 5
Press the PLAY
CD SYNC.(
( ) button.
button.
• •
Use the CD selection ( , ) When stopped, Press and hold the
button to start the recording from the
buttons to select the desired song.
first piece of music.
•
Press and hold CD SYNC.(
button during the playback of CD to
start the recording from the first part
of the music being played.
GB
3
Load a compact
disc.
•
) Press the OPEN/CLOSE button
( ) to open the CD door.
•
Insert a CD and press the
OPEN/CLOSE button ( ) to
close the CD door.
6
To stop recording,
)
press button.
)
56