Download Print this page

YASKAWA JVOP-181 Driver Installation Manual

Usb copy unit (y-stick)

Hide thumbs Also See for JVOP-181:

Download this manual

Installing the JVOP-181 USB Copy Unit (Y-Stick) Driver

To install the driver, please follow the steps below;

1. Copy the driver to a folder located on the PC such as "My Documents".

2. Insert the USB connector from the JVOP-181 Copy Unit into an available

USB port on the PC.

3. The PC will recognize the new hardware and will display the Hardware Wizard

shown below.

4. Follow the Hardware Wizard and select "Install from a list or specific location (Advanced)

then select "Next".

IG.V1000.01

JVOP-181 USB Copy Unit (Y-Stick)

Driver Installation Guide

12/11/2007

Page 1 To install the driver, please follow the steps below; 1. Copy the driver to a folder located on the PC such as “My Documents”. 2. Insert the USB connector from the JVOP-181 Copy Unit into an available USB port on the PC.
Page 2 JVOP-181 USB Copy Unit (Y-Stick) Driver Installation Guide 5. Select “Search for the best driver in these locations”. 6. Select “Include this location in the search”. 7. Select “Browse” and choose the location where the file was saved. 8. Select “Next”.