Am Antenna Connection - Samsung HT-DS140 Instruction Manual

Hide thumbs Also See for HT-DS140:
Table of Contents

Advertisement

1p~36p(DS140)-Sea
9/15/04 6:09 PM

AM antenna connection

If AM reception is poor, connect an outdoor
Snap the tabs on the loop into the
slots of the base to assemble the
AM loop antenna.
1
Connect the AM loop antenna supplied to the AM and
2
If reception is poor, connect an outdoor single vinyl-covered wire to the AM
terminal. (Keep the AM loop antenna connected).
Cooling Fan
IMPEDANCE
SUBWOOFER : 3Ω
FRONT / CENTER / REAR : 6Ω
CENTER REAR
FRONT
L
L
SUBWOOFER
REAR
FRONT
R
R
Page 23
AM antenna(not supplied).
AM Loop Antenna
(supplied)
The cooling fan dissipates the heat generated inside the unit so that the unit can be operated
normally. The cooling fan is activated automatically to supply cool air to the unit.
Please observe the following cautions for your safety.
Make sure the unit is well-ventilated. If the unit has poor ventilation, the temperature inside the unit could rise
and may damage it.
Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a
newspaper or cloth, heat may build up inside the unit and fire may result.)
1
2
3
terminals.
20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents