Drc (Dynamic Range Compression); Av-Sync; Hdmi Audio; Eq Optimizer - Samsung HT-C550-XAC User Manual

Setup
✎
NOTE

ASC setup can be made when there is no disc in
the product.

You cannot adjust the volume during the ASC
setup.

If the auto sound microphone is disconnected
during the ASC setup, the setup will be canceled.

When ASC function is activated, the DSP/EQ,
Dolby Pro Logic ll and P. BASS sound effects will
not work.

If the product is connected to external devices or
other components (such as an iPod, AUX, D.IN),
the ASC Setup may not work exactly.
Auto Sound Calibration
You will hear either the ASC mode or the User
Speaker Settings.
•
ON: You will hear sound in the Auto Sound
Calibration(ASC) mode.
•
OFF: You will hear sound in the Speaker Setting
value you set.
Settings
Auto Sound Calibration
Auto Sound Calibration
Auto Sound Calibration Setting
Change
Auto Sound Calibration Setting
1. Plug the ASC microphone into the ASC input
jack.
2. Place the ASC microphone at the listening
position.
•
Auto Sound Calibration will be automatically set
up in the following sequence:
Front Left Center
Right Rear Left
•
Press the RETURN button to cancel the Auto
Sound Calibration Setting.
•
When the message "REMOVE MIC" appears on
the display, unplug the ASC microphone.
30
English
: ON
►
Select Return
Move Select Return
Front Right Rear
Subwoofer
✎
NOTE

Setting the Auto Sound Calibration function
takes about 3 minutes.

DRC (Dynamic Range Compression)

This feature balances the range between the loudest
and quietest sounds. You can use this function to
enjoy Dolby Digital sound when watching movies at
low volume at night.
•
You can select either off, 2/8, 4/8, 6/8, Full.

AV-SYNC

Video and audio sync may not match with digital TV.
If this occurs, adjust the audio delay time to
match the video
•
You can set the audio delay time between 0 mSec
and 300 mSec. Set it to the optimal status.

HDMI AUDIO

The audio signals transmitted over the HDMI Cable
can be toggled On/Off.
•
On : Both video and audio signals are transmitted
over the HDMI connection cable, and audio
is output through your TV speakers only.
•
Off : Video is transmitted over the HDMI
connection cable only, and audio is output
through the product speakers only.
✎
NOTE

The default setting of this function is HDMI Audio
Off.

HDMI Audio is automatically down-mixed to 2ch
for TV speakers.

When HDMI Audio is set to On, PL II /DSP EQ
/P.BASS doesn't work.

In the iPod mode, this menu is not available.

EQ Optimizer

Set optimal EQ automatically depending on
the region.
•
Off: Turn EQ Optimizer off.
•
On: Turn EQ Optimizer on.