Installing The Speakers On The Tallboy Stand; Connecting The Speakers - Samsung AH68-02259K User Manual

Installing the Speakers on the Tallboy Stand

* HT-C453 only - Front Speakers
* HT-C455 only - Front/Rear Speakers
1.
Turn the Stand Base upside-down and connect
it to the Stand.
2. Insert four small screws clockwise into the four holes
marked using a screwdriver as shown in the
illustration.
3. Connect the upper Speaker to the assembled Stand.
4. Insert another large screw clockwise into the hole
on the rear of the speaker using a screwdriver.

Connecting The Speakers

1.
Press down the terminal tab on the back of the speaker.
2. Insert the black wire into the black terminal (–) and the red wire into the red
terminal (+), and then release the tab.
3. Connect the connecting plugs to the back of the product by matching the
colours of the speaker plugs to the speaker jacks.
In case of HT-C450
Front Speaker (R)
Rear Speaker (R)
* Refer to page 16 for the speakers of HT-C453/C455.
1
Stand
Base
Stand
3
Speaker
Stand
Centre Speaker
DIGITAL
AUDIO IN
OPTICAL
Subwoofer
2 2
4 4 4
Black
Red
Front Speaker (L)
VIDEO FM ANT .
OUT
HDMI OUT
COMPONENT
AUX IN
OUT
Rear Speaker (L)
1
English