Speaker Components; Installing The Speakers On The Tallboy Stand - Samsung HT-D445K User Manual

Connections

Speaker Components

(L) (R)
FRONT
STAND
(L) (R)
STANDBASE
SURROUND

Installing the Speakers on the Tallboy Stand

1. Turn the Stand Base upside-down and connect it to
the Stand.
2. Insert small screws (4*20, For connecting Stand & Stand
Base) clockwise into the four holes marked using a
screwdriver as shown in the illustration.
!
CAUTION : When you use a torque screwdriver, be
careful not to put excessive force. Otherwise, it runs
idle or can be damaged. (torque screwdriver- below 15
kg.f.cm)
3. Connect the upper Speaker to the assembled Stand.
4. Insert another large screw (5*15, For connecting Speaker
& Stand) clockwise into the hole on the rear of the
speaker using a screwdriver.
5. This is the appearance after the speaker is installed.
Follow this steps to install other speaker.
1
English
Assembled Speakers
SPEAKERCABLE
SCREW (5×15): 4EA

SCREW (4×20): 16EA
CENTER
FRONT/SURROUND SPEAKER
SUBWOOFER
1
3
5
Center SPEAKER
SUBWOOFER
2
Stand
Base
Stand
4
Speaker
Stand