Connecting Speakers - Samsung 2.008030309222e16 Instruction Manual

Digital surround av receiver system
Table of Contents

Advertisement

Connecting speakers

Before moving or installing the product, be sure to turn off the power and disconnect the power cord.
SL
SBL
Position of AV Receiver
• Place AV Receiver on a dedicated stand or rack.
Front Speakers
• Place these speakers in front of your listening
position, facing inwards (about 45°) toward you.
• Place the speakers so that their tweeters will be at the
same height as your ears.
• Align the front face of the front speakers with the front
face of the center speaker or place them slightly in
front of the center speaker.
Center speaker
• It is best to install it at the same height as the front speakers.
• You can also install it directly over or under the TV.
Subwoofer
• The position of the subwoofer is not so critical.
Place it anywhere you like.
Subwoofer function
Active subwoofer with integrated 150W amplifier provides rich bass sound.
1
Connect the SW OUT terminal of the amplifier (AV-R720) to the INPUT
terminal of the subwoofer speaker.
2
Press the POWER button on the rear side of the subwoofer to turn
the power on.
3
Using the subwoofer's VOLUME control, you can set the desired bass level
(See page 30 "Setting Speaker Level" to set the subwoofer level in the menu).
10
SR
SBR
Surround Speakers
• Place these speakers behind your listening position.
• If there isn't enough room, place these speakers so they
face each other.
• Place them about 60 to 90cm (2 to 3feet) above your
ears, facing slightly downward.
Unlike the front and center speakers, the surround
speakers are used to handle mainly sound effects and
sound will not come from them all the time.
Surround Back Speakers
SBL SBR
• If you are using two rear center speakers, place them
facing forward from behind the listening position.
• Place the surround back speaker about 70 cm to 1 m
(2.3~3.3feet) above surround speakers, facing slightly
downwards.
• When you attach the speakers to a wall, make sure to
fasten them tightly so they do not fall off.
ACTIVE SUBWOOFER
(BUILT-IN POWER AMPLIFIER)
PS-AW720S
FRONT (R)
FRONT (L)
SURROUND (R)
PS-AF720S
PS-AF720S
PS-AR720S
CENTER
PS-AC720S
√ CONNECTING SPEAKER WIRE
1. Loosen the knob by turning counterclockwise.
2. Insert the bare part of the wire into the hole in the side of each terminal.
3. Tighten the knob by turning clockwise to secure the wire.
√ Connecting the Speakers
1. Press down the terminal tab on the back of the speaker.
2. Insert the black wire into the black terminal (–) and the red wire
into the red (+) terminal, and then release the tab.
3. Connect the connecting plugs to the back of the Home Theater.
• Make sure the colors of the speaker terminals match the colors
of the connecting plugs.
• Keep the subwoofer speaker out of reach of children to
Caution
prevent them from inserting their hands or objects
into the duct (hole).
SURROUND
SURROUND
SURROUND (L)
BACK (R)
BACK (R)
PS-AR720S
(Not supplied)
SYSTEM MODEL NAME : HT-AS720S
MAIN UNIT
AV-R720
FRONT SPEAKER
PS-AF720S
CENTER SPEAKER
PS-AC720S
SURROUND SPEAKER
PS-AR720S
ACTIVE SUBWOOFER
PS-AW720S
1
2
Black
• Never touch speaker terminals while the power is on.
Doing so could result in electric shock.
• Make sure the polarities (+ and -) are correct.
• This system is capable of reproducing 6.1/7.1
channel sound, however only 5.1 speakers are
supplied.
ENG
MAIN UNIT
AV-R720
Red
11

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ht-as720s-xacHt-as720s

Table of Contents