Download Print this page

Genius SP-925B General Instructions

Bluetooth subwoofer speaker

Advertisement

Quick Links

1. General Functions
Turn on
Pairing
Turn off
Automatic
turn-off
Charging
Answer call
End call
Second call
Reject call
Volume up
Volume
Down
Next
Long press "Pause/Play" until blue and red LED flash in
turn.
Once the speaker is on, it enters into automatic status; if
the speaker has been connected to a device before, it will
automatically connect to the previous device, otherwise it
will enter pairing mode.
When device is on, long press "Pause/Play" until red LED
flashes once, and the speaker will turn off.
When in pairing mode, the product will shut down
automatically if it is not connected to a device for 5
minutes.
Plug the charger to port of the device. (Red LED is on).
Short press "Pause/Play" button for an incoming call.
Short press "Pause/Play" button to end call.
If a second call in comes in, short press "Pause/Play"
button to answer it, long press "Pause/Play" button to
reject it; then long press "Pause/Play" button to switch
between the two calls; short press the "Pause/Play"
button to end the current call.
Long press "Pause/Play" button to reject incoming call.
Short Press "
Short Press "
Short Press "
" button for next music.
" button for volume up.
" button for volume down.
-1-
English

Advertisement

loading

Summary of Contents for Genius SP-925B

  • Page 1 English 1. General Functions Turn on Long press “Pause/Play” until blue and red LED flash in turn. Pairing Once the speaker is on, it enters into automatic status; if the speaker has been connected to a device before, it will automatically connect to the previous device, otherwise it will enter pairing mode.
  • Page 2 English Previous Short Press “ ” button for previous music. Short press “Pause/Play” button to play/pause the music Play/pause when the product is connected. Factory reset Long press “ ” +” ” at pairing mode to reset and clear the paired device list. 2.