Sony SU-WL500 Installation Manual page 4

Step 1:
Checking the parts
required for the
installation
Follow Step 1 in the SU-WL500 instruction manual to
check the parts.
Step 2:
Deciding on the
installation location
Follow Step 2 in the SU-WL500 instruction manual to
decide on the installation location. Refer to page 8 of
this manual for the TV installation dimension table.
Step 3:
Installing the Base
Bracket on the wall
Follow Step 3 in the SU-WL500 instruction manual to
install the Base Bracket.
4
(GB)
Step 4:
Preparing for the
installation of the TV
1
(For XBR-75X850C/XBR-
65X850C/KDL-75W850C/KDL-
65W850C only) Remove four
screws from the rear of the TV.
2
(For KDL-55W800C only) Attach
the Wall-Mount Attachment
(supplied with the TV) to the rear
of the TV (to make it parallel
with the wall).
Soft cloth
1.5 N·m {15 kgf·cm}
Wall-Mount
Attachment