Sony SU-WL500 Installation Manual page 3

Wall-mount bracket
Hide thumbs Also See for SU-WL500:
Table of Contents

Advertisement

Available languages

Available languages

WARNING
If the following precautions are not observed,
serious injury or death through fire, electric
shock, the product toppling over, or the
product dropping can result.
Be sure to read thoroughly the all safety information
described in the instruction manual of SU-WL500.
Do NOT use SU-WL450 for installation in portrait
orientation.
Provide adequate clearances
around the TV.
The following illustration shows how much space is
required around the TV.
Unit: mm (inches)
100
(4)
Use the TV within the operating
temperature range.
The operating temperature is 0°C to 35°C (When
using XBR-55X850C, set the Brightness setting to
Standard or Custom 44/50 or below).
Do not block the ventilation holes of
the TV.
If you block the ventilation holes with tapes or other
objects, heat builds up inside the TV and may cause a
fire.
100
(4)
Others
• When installing in portrait orientation, only the
following input/output jacks are available:
– HDMI IN 1/2/3/4 jacks (4K supported)
– MHL jack (shared with the HDMI IN 2 jack)
DIGITAL AUDIO OUT (OPTICAL) jack
– AUDIO OUT
/ jack
–  LAN connector
(USB 1/2) ports,
• If you cover the illumination LED and its
surroundings with tapes or other objects, the
status of the TV cannot be recognized and the
remote control may not work.
• When carrying the TV, hold it in landscape
orientation, and take care not to drop it when
installing. Do not apply excessive force to the TV;
otherwise, it may be deformed.
(USB 3) port
3
(GB)
GB

Advertisement

Table of Contents
loading

Table of Contents