Picture Options
You can set detailed picture settings.
1
Press the MENU button to display the menu.
Press the ENTER button to select Picture.
Press the ▲ or ▼ button to select Picture Options, then press
the ENTER button.
4
Select the required option by pressing the ▲ or ▼ button, then
press the ENTER button.
5
When you are satisfied with your setting, press the ENTER
button.
Press the EXIT button to exit.
➢
In PC mode, you can only make changes to the Color Tone,
Size and Screen Burn Protection from among the items in
Picture Options.
Colour Tone: Cool/Cool1/Normal/Warm1/Warm
➢
When the picture mode is set to Dynamic or Standard,
Warm1 and Warm cannot be selected.
Size: 1:/Wide Zoom/Zoom/4:/Just Scan
You can select the picture size which best corresponds to
your viewing requirements.
− 1:: Sets the picture to 16:9 wide mode.
− Wide Zoom: Magnify the size of the picture more than 4:3.
Move the screen up/down using the ▲ or ▼ button after
selecting the
by pressing the ► or ENTER button.
− Zoom: Magnify the size of the picture vertically on screen.
− 4:: Sets the picture to 4:3 normal mode.
− Just Scan: Use this function to see the full
image without any cutoff when HDMI(720p/1080i/
1080p),Component(1080i/1080p) signals are input.
After selecting Just Scan in HDMI (100i/100p) or
Component (100i/100p) mode:
Press the ◄ or ► button to select
ENTER button.
Press the ▲, ▼, ◄ or ► button to move the picture.
Reset: Press the ◄ or ► button to select Reset, then press
the ENTER button.
You can initialize the setting.
➢
With the HDMI Just Scan picture size, depending on the AV devices, the screen may be cut off
or a specific colour appears on the screen.
➢
For an HDMI (1080p) connection of 24, 25, 30, 50, and 60 Hz, and for a Component (1080p)
connection of 50 and 60Hz, only the input source is supported.
➢
You can change the picture size simply by pressing the P.SIZE button on the remote control.
➢
Depending on the input source, the picture size options may vary.
➢
The items available may differ depending on the selected mode.
➢
When Double ( ,
➢
In PC Mode, only 1: and 4: mode can be adjusted.
Positioning and Sizing the screen using Zoom
− Resizing the screen using the Zoom enables the positioning and sizing of the screen to up/down
direction using the ▲ or ▼ button as well as the screen size.
− Move the screen up/down using the ▲ or ▼ button after selecting the
button.
− Resize the screen vertically using the ▲ or ▼ button after selecting the
button.
Digital NR: Off/Low/Medium/High/Auto
If the signal received by the television is weak, you can activate this feature to reduce any static and
ghosting that may appear on the screen.
➢
This function is not available in PC mode.
➢
When the signal is weak, select one of the other options until the best picture is displayed.
, then press the
) mode has been set in PIP, the Picture Size cannot be set.
English - 0
T V
Picture
More
Picture Options
Reset
: OK
Move
Enter
T V
Picture Options
Colour Tone
: Normal
Size
: 1:
Digital NR
: Auto
DNle
: Off
HDMI Black Level : Normal
Movie Plus
: Low
Blue Only Mode
: Off
Screen Burn Protection
Move
Enter
T V
Size
1 :
Wide Zoom
Zoom
4 :
Just Scan
Move
Enter
by pressing the ◄ or ►
by pressing the ◄ or ►
Continued...
Return
Return
Return