Sound Features - Samsung PS-42C67HD Owner's Instructions Manual

Sound Features

1 Press the MENU button to display the menu.
2 Press the ▲ or ▼ button to select Sound, then press the
ENTER/OK button.
3 Select the required option by pressing the ▲ or ▼ button, then
press the ENTER/OK button.
Available options: Mode, Equalizer, SRS TS XT, Auto Volume,
Internal Mute, Sound Select, Reset
4 When you are satisfied with your setting, press the ENTER/OK
button.
5 Press the EXIT button to exit.
 Mode: Standard/Music/Movie/Speech/Custom
You can select the type of special sound effect to be used when
watching a given broadcast.
 Equalizer: Balance/100Hz/300Hz/1kHz/3kHz/10kHz
The television has several settings which allow you to control
the sound quality.
➢
If you make any changes to these settings, the sound mode
is automatically switched to Custom.
 SRS TS XT: Off/On
TruSurround XT is a patented SRS technology that solves
the problem of playing 5.1 multichannel content over two
speakers. TruSurround delivers a compelling, virtual surround
sound experience through any two-speaker playback system,
including internal television speakers. It is fully compatible with
all multichannel formats.
➢
TruSurround XT, SRS and
Symbol are trademarks of SRS Labs,
Inc. TruSurround XT technology is
incorporated under license from SRS
Labs, Inc.
➢
You can select these options simply by pressing the SRS
button on the remote control.
 Auto Volume: Off/On
Each broadcasting station has its own signal conditions, and
so it is not easy to adjust the volume every time the channel is
changed. This feature lets you automatically adjust the volume
of the desired channel by lowering the sound output when the modulation signal is high or by raising
the sound output when the modulation signal is low.
 Internal Mute: Off/On
If you want to hear the sound through separate speakers, cancel the internal amplifier.
➢
The +, - and MUTE buttons do not operate when the Internal Mute is set to On.
 Sound Select: Main/Sub
When the PIP feature is activated, you can listen to the sound of the sub (PIP) picture.
− Main: Used to listen to the sound of the main picture.
− Sub: Used to listen to the sound of the sub picture.
 Reset
If Game Mode is On, the Reset Sound function is activated. Selecting the Reset function after setting
the equalizer resets the equalizer setting to the factory defaults.
TRADEMARK & LABEL LICENSE NOTICE
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
English - 22
< If Game Mode is On >